Deutz Agrotron 200 7.1 MK 200hp (147kW) 865Nm — Stage 1 file (+58 hp)
hp
Stage 1 file for Deutz Agrotron 200 7.1 MK 200hp (147kW) 865Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Deutz Agrotron 200 7.1 MK 200hp (147kW) 865Nm ECU
Deutz Agrotron (I) 200 7.1 MK 200hp (147kW) 865Nm — agricultural diesel engine of the agricultural segment of the Deutz AG group (Германия, 1864). Stage 1 chip tuning raises power from 200 to 258 hp (+58 hp, +29%) and torque from 865 to 985 Nm (+120 Nm).
Deutz engines are used across a wide range of agricultural and special machinery. Deutz is a German diesel engine manufacturer, founded in 1864. Deutz is the oldest internal-combustion engine manufacturer in the world. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Deutz — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
What power gain do you get after chip tuning the Deutz Agrotron 200 7.1 MK 200hp (147kW) 865Nm?
After Stage 1 the power of the Deutz Agrotron 200 7.1 MK 200hp (147kW) 865Nm rises from 200 to 258 hp, a gain of 58 hp (+29%). Torque rises from 865 to 985 Nm (+120 Nm).
How does Stage 1 differ from stock on the Deutz Agrotron?
Stage 1 on the Deutz Agrotron 200 7.1 MK 200hp (147kW) 865Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +58 hp with no hardware changes.
What does Stage 1 give on the powerful Deutz Agrotron 200 7.1 MK 200hp (147kW) 865Nm?
The high-output Deutz Agrotron 200 7.1 MK 200hp (147kW) 865Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the Deutz Agrotron 200 7.1 MK 200hp (147kW) 865Nm?
Stage 2 on the Deutz Agrotron 200 7.1 MK 200hp (147kW) 865Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Deutz Agrotron?
Stage 1 on the Deutz Agrotron voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Deutz Agrotron 200 7.1 MK 200hp (147kW) 865Nm done?
The full remap cycle for the Deutz Agrotron — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Deutz Agrotron?
The original Deutz Agrotron ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Deutz Agrotron 200 7.1 MK 200hp (147kW) 865Nm?
The cost of Stage 1 for the Deutz Agrotron 200 7.1 MK 200hp (147kW) 865Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.