Deutz Agrotron 120 6.1 MK 118hp (87kW) 476Nm — Stage 1 file (+27 hp)
hp
Stage 1 file for Deutz Agrotron 120 6.1 MK 118hp (87kW) 476Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Deutz Agrotron 120 6.1 MK 118hp (87kW) 476Nm ECU
Deutz Agrotron (I) 120 6.1 MK 118hp (87kW) 476Nm — agricultural diesel engine of the agricultural segment of the Deutz AG group (Германия, 1864). Stage 1 chip tuning raises power from 118 to 145 hp (+27 hp, +23%) and torque from 476 to 570 Nm (+94 Nm).
Deutz is a German diesel engine manufacturer, founded in 1864. Deutz is the oldest internal-combustion engine manufacturer in the world. Deutz engines are used across a wide range of agricultural and special machinery. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Deutz среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much does the power of the Deutz Agrotron 120 6.1 MK 118hp (87kW) 476Nm increase after Stage 1?
Stage 1 chip tuning on the Deutz Agrotron 120 6.1 MK 118hp (87kW) 476Nm boosts engine output by 27 hp: from 118 to 145 hp. Torque rises from 476 to 570 Nm (+94 Nm).
What changes in the Deutz Agrotron ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Deutz Agrotron with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +27 hp with no hardware changes.
What is the risk of Stage 1 on the Deutz Agrotron 120 6.1 MK 118hp (87kW) 476Nm?
A remap of the Deutz Agrotron 120 6.1 MK 118hp (87kW) 476Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Deutz Agrotron 120 6.1 MK 118hp (87kW) 476Nm?
Stage 2 for the Deutz Agrotron 120 6.1 MK 118hp (87kW) 476Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Deutz Agrotron remain valid after Stage 1?
After remapping the Deutz Agrotron, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Deutz Agrotron?
Reading and writing via OBD takes 25-30 minutes on the Deutz Agrotron. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Deutz Agrotron?
Before Stage 1 the original of the Deutz Agrotron 120 6.1 MK 118hp (87kW) 476Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Deutz Agrotron 120 6.1 MK 118hp (87kW) 476Nm cost?
The remap price for the Deutz Agrotron 120 6.1 MK 118hp (87kW) 476Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.