Deutz Agrotron 110 6.1 MK 110hp (81kW) 417Nm — Stage 1 file (+30 hp)
hp
Stage 1 file for Deutz Agrotron 110 6.1 MK 110hp (81kW) 417Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Deutz Agrotron 110 6.1 MK 110hp (81kW) 417Nm ECU
Deutz Agrotron (I) 110 6.1 MK 110hp (81kW) 417Nm — agricultural diesel engine of the agricultural segment of the Deutz AG group (Германия, 1864). Stage 1 chip tuning raises power from 110 to 140 hp (+30 hp, +27%) and torque from 417 to 500 Nm (+83 Nm).
Deutz engines are used across a wide range of agricultural and special machinery. Deutz is a German diesel engine manufacturer, founded in 1864. Deutz is the oldest internal-combustion engine manufacturer in the world. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Deutz среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
What power gain do you get after chip tuning the Deutz Agrotron 110 6.1 MK 110hp (81kW) 417Nm?
Stage 1 chip tuning on the Deutz Agrotron 110 6.1 MK 110hp (81kW) 417Nm boosts engine output by 30 hp: from 110 to 140 hp. Torque rises from 417 to 500 Nm (+83 Nm).
What changes in the Deutz Agrotron ECU after Stage 1?
Stage 1 on the Deutz Agrotron 110 6.1 MK 110hp (81kW) 417Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +30 hp with no hardware changes.
Is a Stage 1 remap safe for the 110 6.1 MK 110hp (81kW) 417Nm?
Stage 1 on the Deutz Agrotron 110 6.1 MK 110hp (81kW) 417Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Deutz Agrotron 110 6.1 MK 110hp (81kW) 417Nm?
Stage 2 for the Deutz Agrotron 110 6.1 MK 110hp (81kW) 417Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Deutz Agrotron?
Stage 1 on the Deutz Agrotron voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Deutz Agrotron 110 6.1 MK 110hp (81kW) 417Nm done?
The full remap cycle for the Deutz Agrotron — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Deutz Agrotron?
The original Deutz Agrotron ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Deutz Agrotron 110 6.1 MK 110hp (81kW) 417Nm?
The cost of Stage 1 for the Deutz Agrotron 110 6.1 MK 110hp (81kW) 417Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.