Deutz Agrofarm 430 109hp (80kW) 400Nm — Stage 1 file (+21 hp)
hp
Stage 1 file for Deutz Agrofarm 430 109hp (80kW) 400Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Deutz Agrofarm 430 109hp (80kW) 400Nm ECU
Deutz Agrofarm (I) 430 109hp (80kW) 400Nm — agricultural diesel engine of the agricultural segment of the Deutz AG group (Германия, 1864). Stage 1 chip tuning raises power from 109 to 130 hp (+21 hp, +19%) and torque from 400 to 460 Nm (+60 Nm).
Deutz engines are used across a wide range of agricultural and special machinery. Deutz is a German diesel engine manufacturer, founded in 1864. Deutz is the oldest internal-combustion engine manufacturer in the world. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Deutz среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How many horsepower does the Deutz Agrofarm 430 109hp (80kW) 400Nm reach after a remap?
After Stage 1 the power of the Deutz Agrofarm 430 109hp (80kW) 400Nm rises from 109 to 130 hp, a gain of 21 hp (+19%). Torque rises from 400 to 460 Nm (+60 Nm).
How does Stage 1 differ from stock on the Deutz Agrofarm?
Stage 1 on the Deutz Agrofarm 430 109hp (80kW) 400Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +21 hp with no hardware changes.
Is a Stage 1 remap safe for the 430 109hp (80kW) 400Nm?
Stage 1 on the Deutz Agrofarm 430 109hp (80kW) 400Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Deutz Agrofarm 430 109hp (80kW) 400Nm?
Stage 2 on the Deutz Agrofarm 430 109hp (80kW) 400Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Deutz Agrofarm?
Stage 1 on the Deutz Agrofarm voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Deutz Agrofarm 430 109hp (80kW) 400Nm done?
The full remap cycle for the Deutz Agrofarm — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Deutz Agrofarm?
The original Deutz Agrofarm ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Deutz Agrofarm 430 109hp (80kW) 400Nm?
The cost of Stage 1 for the Deutz Agrofarm 430 109hp (80kW) 400Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.