Deutz Agrocompact 75 4.0 R4 71hp (52kW) 257Nm — Stage 1 file (+24 hp)
hp
Stage 1 file for Deutz Agrocompact 75 4.0 R4 71hp (52kW) 257Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Deutz Agrocompact 75 4.0 R4 71hp (52kW) 257Nm ECU
Deutz Agrocompact (I) 75 4.0 R4 71hp (52kW) 257Nm — agricultural diesel engine of the agricultural segment of the Deutz AG group (Германия, 1864). Stage 1 chip tuning raises power from 71 to 95 hp (+24 hp, +34%) and torque from 257 to 310 Nm (+53 Nm).
Deutz engines are used across a wide range of agricultural and special machinery. Deutz is a German diesel engine manufacturer, founded in 1864. Deutz is the oldest internal-combustion engine manufacturer in the world. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Маломощные агро-дизели — компактная техника; Stage 1 безопасный.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Маломощные Deutz — компактная техника; Stage 1 безопасный.
Frequently asked questions
How many horsepower does the Deutz Agrocompact 75 4.0 R4 71hp (52kW) 257Nm reach after a remap?
After Stage 1 the power of the Deutz Agrocompact 75 4.0 R4 71hp (52kW) 257Nm rises from 71 to 95 hp, a gain of 24 hp (+34%). Torque rises from 257 to 310 Nm (+53 Nm).
How does Stage 1 differ from stock on the Deutz Agrocompact?
Stage 1 on the Deutz Agrocompact 75 4.0 R4 71hp (52kW) 257Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +24 hp with no hardware changes.
Is Stage 1 safe for the low-output Deutz Agrocompact 75 4.0 R4 71hp (52kW) 257Nm?
Stage 1 on the base Deutz Agrocompact is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How does Stage 2 differ from Stage 1 on the Deutz Agrocompact 75 4.0 R4 71hp (52kW) 257Nm?
Stage 2 on the Deutz Agrocompact 75 4.0 R4 71hp (52kW) 257Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Deutz Agrocompact?
Stage 1 on the Deutz Agrocompact voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Deutz Agrocompact 75 4.0 R4 71hp (52kW) 257Nm done?
The full remap cycle for the Deutz Agrocompact — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Deutz Agrocompact?
The original Deutz Agrocompact ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Deutz Agrocompact 75 4.0 R4 71hp (52kW) 257Nm?
The cost of Stage 1 for the Deutz Agrocompact 75 4.0 R4 71hp (52kW) 257Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.