Deutz Agrocompact 100 4.0 R4 90hp (66kW) 372Nm — Stage 1 file (+24 hp)
hp
Stage 1 file for Deutz Agrocompact 100 4.0 R4 90hp (66kW) 372Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Deutz Agrocompact 100 4.0 R4 90hp (66kW) 372Nm ECU
Deutz Agrocompact (I) 100 4.0 R4 90hp (66kW) 372Nm — agricultural diesel engine of the agricultural segment of the Deutz AG group (Германия, 1864). Stage 1 chip tuning raises power from 90 to 114 hp (+24 hp, +27%) and torque from 372 to 440 Nm (+68 Nm).
Deutz is a German diesel engine manufacturer, founded in 1864. Deutz is the oldest internal-combustion engine manufacturer in the world. Deutz engines are used across a wide range of agricultural and special machinery. Маломощные агро-дизели — компактная техника; Stage 1 безопасный. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Маломощные Deutz — компактная техника; Stage 1 безопасный.
Frequently asked questions
What is the Stage 1 effect on the Deutz Agrocompact 100 4.0 R4 90hp (66kW) 372Nm?
After Stage 1 the power of the Deutz Agrocompact 100 4.0 R4 90hp (66kW) 372Nm rises from 90 to 114 hp, a gain of 24 hp (+27%). Torque rises from 372 to 440 Nm (+68 Nm).
How does Stage 1 differ from stock on the Deutz Agrocompact?
Stage 1 is a software optimization of the factory ECU firmware of the Deutz Agrocompact with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +24 hp with no hardware changes.
Is Stage 1 worth doing on the base Deutz Agrocompact?
Stage 1 on the base Deutz Agrocompact is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Deutz Agrocompact 100 4.0 R4 90hp (66kW) 372Nm?
Stage 2 on the Deutz Agrocompact 100 4.0 R4 90hp (66kW) 372Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Deutz Agrocompact remain valid after Stage 1?
After remapping the Deutz Agrocompact, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Deutz Agrocompact?
Reading and writing via OBD takes 25-30 minutes on the Deutz Agrocompact. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Deutz Agrocompact?
Before Stage 1 the original of the Deutz Agrocompact 100 4.0 R4 90hp (66kW) 372Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Deutz Agrocompact 100 4.0 R4 90hp (66kW) 372Nm cost?
The remap price for the Deutz Agrocompact 100 4.0 R4 90hp (66kW) 372Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.