Deutz 6 Series 6180 TTV 175hp (129kW) 740Nm — Stage 1 file (+25 hp)
hp
Stage 1 file for Deutz 6 Series 6180 TTV 175hp (129kW) 740Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Deutz 6 Series 6180 TTV 175hp (129kW) 740Nm ECU
Deutz 6 Series (I) 6180 TTV 175hp (129kW) 740Nm — agricultural diesel engine of the agricultural segment of the Deutz AG group (Германия, 1864). Stage 1 chip tuning raises power from 175 to 200 hp (+25 hp, +14%) and torque from 740 to 864 Nm (+124 Nm).
Deutz engines are used across a wide range of agricultural and special machinery. Deutz is a German diesel engine manufacturer, founded in 1864. Deutz is the oldest internal-combustion engine manufacturer in the world. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Deutz среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How many horsepower does the Deutz 6 Series 6180 TTV 175hp (129kW) 740Nm reach after a remap?
Stage 1 for the Deutz 6 Series 6180 TTV 175hp (129kW) 740Nm adds +25 hp — power increases from 175 to 200 hp (+14%). Torque rises from 740 to 864 Nm (+124 Nm).
What does a Stage 1 remap of the Deutz 6 Series 6180 TTV 175hp (129kW) 740Nm include?
Stage 1 on the Deutz 6 Series 6180 TTV 175hp (129kW) 740Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +25 hp with no hardware changes.
Is a Stage 1 remap safe for the 6180 TTV 175hp (129kW) 740Nm?
Stage 1 on the Deutz 6 Series 6180 TTV 175hp (129kW) 740Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Deutz 6 Series 6180 TTV 175hp (129kW) 740Nm?
Stage 2 for the Deutz 6 Series 6180 TTV 175hp (129kW) 740Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Deutz 6 Series?
Stage 1 on the Deutz 6 Series voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Deutz 6 Series 6180 TTV 175hp (129kW) 740Nm done?
The full remap cycle for the Deutz 6 Series — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Deutz 6 Series?
The original Deutz 6 Series ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Deutz 6 Series 6180 TTV 175hp (129kW) 740Nm?
The cost of Stage 1 for the Deutz 6 Series 6180 TTV 175hp (129kW) 740Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.