Deutz 6 Series 6160.4 TTV 166hp (122kW) 658Nm — Stage 1 file (+26 hp)
hp
Stage 1 file for Deutz 6 Series 6160.4 TTV 166hp (122kW) 658Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Deutz 6 Series 6160.4 TTV 166hp (122kW) 658Nm ECU
Deutz 6 Series (I) 6160.4 TTV 166hp (122kW) 658Nm — agricultural diesel engine of the agricultural segment of the Deutz AG group (Германия, 1864). Stage 1 chip tuning raises power from 166 to 192 hp (+26 hp, +16%) and torque from 658 to 776 Nm (+118 Nm).
Deutz is a German diesel engine manufacturer, founded in 1864. Deutz is the oldest internal-combustion engine manufacturer in the world. Deutz engines are used across a wide range of agricultural and special machinery. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Deutz среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much horsepower does Stage 1 add for the Deutz 6 Series 6160.4 TTV 166hp (122kW) 658Nm?
Stage 1 for the Deutz 6 Series 6160.4 TTV 166hp (122kW) 658Nm adds +26 hp — power increases from 166 to 192 hp (+16%). Torque rises from 658 to 776 Nm (+118 Nm).
What does a Stage 1 remap of the Deutz 6 Series 6160.4 TTV 166hp (122kW) 658Nm include?
Stage 1 is a software optimization of the factory ECU firmware of the Deutz 6 Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +26 hp with no hardware changes.
What is the risk of Stage 1 on the Deutz 6 Series 6160.4 TTV 166hp (122kW) 658Nm?
A remap of the Deutz 6 Series 6160.4 TTV 166hp (122kW) 658Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Deutz 6 Series 6160.4 TTV 166hp (122kW) 658Nm?
Stage 2 for the Deutz 6 Series 6160.4 TTV 166hp (122kW) 658Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Deutz 6 Series remain valid after Stage 1?
After remapping the Deutz 6 Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Deutz 6 Series?
Reading and writing via OBD takes 25-30 minutes on the Deutz 6 Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Deutz 6 Series?
Before Stage 1 the original of the Deutz 6 Series 6160.4 TTV 166hp (122kW) 658Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Deutz 6 Series 6160.4 TTV 166hp (122kW) 658Nm cost?
The remap price for the Deutz 6 Series 6160.4 TTV 166hp (122kW) 658Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.