Deutz 5 Series 5130 TTV 120hp (88kW) 480Nm — Stage 1 file (+25 hp)
hp
Stage 1 file for Deutz 5 Series 5130 TTV 120hp (88kW) 480Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Deutz 5 Series 5130 TTV 120hp (88kW) 480Nm ECU
Deutz 5 Series (I) 5130 TTV 120hp (88kW) 480Nm — agricultural diesel engine of the agricultural segment of the Deutz AG group (Германия, 1864). Stage 1 chip tuning raises power from 120 to 145 hp (+25 hp, +21%) and torque from 480 to 595 Nm (+115 Nm).
Deutz is a German diesel engine manufacturer, founded in 1864. Deutz is the oldest internal-combustion engine manufacturer in the world. Deutz engines are used across a wide range of agricultural and special machinery. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Deutz среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
What power gain do you get after chip tuning the Deutz 5 Series 5130 TTV 120hp (88kW) 480Nm?
Stage 1 chip tuning on the Deutz 5 Series 5130 TTV 120hp (88kW) 480Nm boosts engine output by 25 hp: from 120 to 145 hp. Torque rises from 480 to 595 Nm (+115 Nm).
What changes in the Deutz 5 Series ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Deutz 5 Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
What is the risk of Stage 1 on the Deutz 5 Series 5130 TTV 120hp (88kW) 480Nm?
A remap of the Deutz 5 Series 5130 TTV 120hp (88kW) 480Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Deutz 5 Series 5130 TTV 120hp (88kW) 480Nm?
Stage 2 for the Deutz 5 Series 5130 TTV 120hp (88kW) 480Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Deutz 5 Series remain valid after Stage 1?
After remapping the Deutz 5 Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Deutz 5 Series?
Reading and writing via OBD takes 25-30 minutes on the Deutz 5 Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Deutz 5 Series?
Before Stage 1 the original of the Deutz 5 Series 5130 TTV 120hp (88kW) 480Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Deutz 5 Series 5130 TTV 120hp (88kW) 480Nm cost?
The remap price for the Deutz 5 Series 5130 TTV 120hp (88kW) 480Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.