Deutz 5 Series 5120 113hp (77kW) 440Nm — Stage 1 file (+35 hp)
hp
Stage 1 file for Deutz 5 Series 5120 113hp (77kW) 440Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Deutz 5 Series 5120 113hp (77kW) 440Nm ECU
Deutz 5 Series (I) 5120 113hp (77kW) 440Nm — agricultural diesel engine of the agricultural segment of the Deutz AG group (Германия, 1864). Stage 1 chip tuning raises power from 105 to 140 hp (+35 hp, +33%) and torque from 460 to 575 Nm (+115 Nm).
Deutz is a German diesel engine manufacturer, founded in 1864. Deutz is the oldest internal-combustion engine manufacturer in the world. Deutz engines are used across a wide range of agricultural and special machinery. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Deutz среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much horsepower does Stage 1 add for the Deutz 5 Series 5120 113hp (77kW) 440Nm?
After Stage 1 the power of the Deutz 5 Series 5120 113hp (77kW) 440Nm rises from 105 to 140 hp, a gain of 35 hp (+33%). Torque rises from 460 to 575 Nm (+115 Nm).
How does Stage 1 differ from stock on the Deutz 5 Series?
Stage 1 is a software optimization of the factory ECU firmware of the Deutz 5 Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
What is the risk of Stage 1 on the Deutz 5 Series 5120 113hp (77kW) 440Nm?
A remap of the Deutz 5 Series 5120 113hp (77kW) 440Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Deutz 5 Series 5120 113hp (77kW) 440Nm?
Stage 2 on the Deutz 5 Series 5120 113hp (77kW) 440Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Deutz 5 Series remain valid after Stage 1?
After remapping the Deutz 5 Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Deutz 5 Series?
Reading and writing via OBD takes 25-30 minutes on the Deutz 5 Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Deutz 5 Series?
Before Stage 1 the original of the Deutz 5 Series 5120 113hp (77kW) 440Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Deutz 5 Series 5120 113hp (77kW) 440Nm cost?
The remap price for the Deutz 5 Series 5120 113hp (77kW) 440Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.