Deutz 5 Series 5110 105hp (77kW) 440Nm — Stage 1 file (+25 hp)
hp
Stage 1 file for Deutz 5 Series 5110 105hp (77kW) 440Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Deutz 5 Series 5110 105hp (77kW) 440Nm ECU
Deutz 5 Series (I) 5110 105hp (77kW) 440Nm — agricultural diesel engine of the agricultural segment of the Deutz AG group (Германия, 1864). Stage 1 chip tuning raises power from 105 to 130 hp (+25 hp, +24%) and torque from 440 to 545 Nm (+105 Nm).
Deutz engines are used across a wide range of agricultural and special machinery. Deutz is a German diesel engine manufacturer, founded in 1864. Deutz is the oldest internal-combustion engine manufacturer in the world. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Deutz среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How many horsepower does the Deutz 5 Series 5110 105hp (77kW) 440Nm reach after a remap?
After Stage 1 the power of the Deutz 5 Series 5110 105hp (77kW) 440Nm rises from 105 to 130 hp, a gain of 25 hp (+24%). Torque rises from 440 to 545 Nm (+105 Nm).
How does Stage 1 differ from stock on the Deutz 5 Series?
Stage 1 on the Deutz 5 Series 5110 105hp (77kW) 440Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +25 hp with no hardware changes.
Is a Stage 1 remap safe for the 5110 105hp (77kW) 440Nm?
Stage 1 on the Deutz 5 Series 5110 105hp (77kW) 440Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Deutz 5 Series 5110 105hp (77kW) 440Nm?
Stage 2 on the Deutz 5 Series 5110 105hp (77kW) 440Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Deutz 5 Series?
Stage 1 on the Deutz 5 Series voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Deutz 5 Series 5110 105hp (77kW) 440Nm done?
The full remap cycle for the Deutz 5 Series — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Deutz 5 Series?
The original Deutz 5 Series ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Deutz 5 Series 5110 105hp (77kW) 440Nm?
The cost of Stage 1 for the Deutz 5 Series 5110 105hp (77kW) 440Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.