Deutz 5 Series 5100 95hp (70kW) 397Nm — Stage 1 file (+29 hp)
hp
Stage 1 file for Deutz 5 Series 5100 95hp (70kW) 397Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Deutz 5 Series 5100 95hp (70kW) 397Nm ECU
Deutz 5 Series (I) 5100 95hp (70kW) 397Nm — agricultural diesel engine of the agricultural segment of the Deutz AG group (Германия, 1864). Stage 1 chip tuning raises power from 95 to 124 hp (+29 hp, +31%) and torque from 397 to 496 Nm (+99 Nm).
Deutz is a German diesel engine manufacturer, founded in 1864. Deutz is the oldest internal-combustion engine manufacturer in the world. Deutz engines are used across a wide range of agricultural and special machinery. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Маломощные агро-дизели — компактная техника; Stage 1 безопасный.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Маломощные Deutz — компактная техника; Stage 1 безопасный.
Frequently asked questions
How many horsepower does the Deutz 5 Series 5100 95hp (70kW) 397Nm reach after a remap?
Stage 1 for the Deutz 5 Series 5100 95hp (70kW) 397Nm adds +29 hp — power increases from 95 to 124 hp (+31%). Torque rises from 397 to 496 Nm (+99 Nm).
What does a Stage 1 remap of the Deutz 5 Series 5100 95hp (70kW) 397Nm include?
Stage 1 is a software optimization of the factory ECU firmware of the Deutz 5 Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +29 hp with no hardware changes.
Is Stage 1 worth doing on the base Deutz 5 Series?
Yes, Stage 1 on the low-output Deutz 5 Series 5100 95hp (70kW) 397Nm delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Deutz 5 Series 5100 95hp (70kW) 397Nm?
Stage 2 for the Deutz 5 Series 5100 95hp (70kW) 397Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Deutz 5 Series remain valid after Stage 1?
After remapping the Deutz 5 Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Deutz 5 Series?
Reading and writing via OBD takes 25-30 minutes on the Deutz 5 Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Deutz 5 Series?
Before Stage 1 the original of the Deutz 5 Series 5100 95hp (70kW) 397Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Deutz 5 Series 5100 95hp (70kW) 397Nm cost?
The remap price for the Deutz 5 Series 5100 95hp (70kW) 397Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.