Detroit Diesel Series 60 Series 60 12.7L 390hp (287kW) 1350Nm — Stage 1 file (+80 hp)
hp
Stage 1 file for Detroit Diesel Series 60 Series 60 12.7L 390hp (287kW) 1350Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Detroit Diesel Series 60 Series 60 12.7L 390hp (287kW) 1350Nm ECU
Detroit Diesel Series 60 (I (1987 - 2007)) Series 60 12.7L 390hp (287kW) 1350Nm — commercial diesel engine of the commercial segment of the Daimler Truck (с 2000) group (США, 1938). Stage 1 chip tuning raises power from 390 to 470 hp (+80 hp, +21%) and torque from 1350 to 1630 Nm (+280 Nm).
Detroit Diesel specialises in heavy-duty diesel engines for Class 8 trucks. Detroit Diesel is part of Daimler Truck. Detroit Diesel is an American diesel-engine manufacturer, founded in 1938. Top diesels in long-haul tractors sit at the power ceiling, and Stage 2 requires hardware. On older truck diesels, Stage 1 goes in over OBD with no complications. Truck diesels carry an extended set of maps for commercial load, with the focus on torque.
The professional logistics segment tunes for fuel consumption and pulling characteristics. The truck chip tuning community is an industry of its own, focused on long-haul routes. Top MAN units sit at the power ceiling of the European truck segment.
Frequently asked questions
What is the Stage 1 effect on the Detroit Diesel Series 60 Series 60 12.7L 390hp (287kW) 1350Nm?
The Stage 1 gain for the Detroit Diesel Series 60 Series 60 12.7L 390hp (287kW) 1350Nm is 80 hp (+21%) over the stock 390 hp, for a total of 470 hp. Torque rises from 1350 to 1630 Nm (+280 Nm).
What is Stage 1 chip tuning for the Detroit Diesel Series 60?
Stage 1 is a software optimization of the factory ECU firmware of the Detroit Diesel Series 60 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +80 hp with no hardware changes.
Does Stage 1 make sense on the Detroit Diesel Series 60 Series 60 12.7L 390hp (287kW) 1350Nm with this much power?
Stage 1 for the Detroit Diesel Series 60 Series 60 12.7L 390hp (287kW) 1350Nm unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
What is Stage 2 for the Detroit Diesel Series 60 Series 60 12.7L 390hp (287kW) 1350Nm?
Stage 2 on the Detroit Diesel Series 60 Series 60 12.7L 390hp (287kW) 1350Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Detroit Diesel Series 60 remain valid after Stage 1?
After remapping the Detroit Diesel Series 60, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Detroit Diesel Series 60?
Reading and writing via OBD takes 25-30 minutes on the Detroit Diesel Series 60. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Detroit Diesel Series 60?
Before Stage 1 the original of the Detroit Diesel Series 60 Series 60 12.7L 390hp (287kW) 1350Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Detroit Diesel Series 60 Series 60 12.7L 390hp (287kW) 1350Nm cost?
The remap price for the Detroit Diesel Series 60 Series 60 12.7L 390hp (287kW) 1350Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.