Detroit Diesel MBE 4000 MBE 4000 12.8L 411hp (302kW) 1450Nm — Stage 1 file (+49 hp)
hp
Stage 1 file for Detroit Diesel MBE 4000 MBE 4000 12.8L 411hp (302kW) 1450Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Detroit Diesel MBE 4000 MBE 4000 12.8L 411hp (302kW) 1450Nm ECU
Detroit Diesel MBE 4000 (I (2000+)) MBE 4000 12.8L 411hp (302kW) 1450Nm — commercial diesel engine of the commercial segment of the Daimler Truck (с 2000) group (США, 1938). Stage 1 chip tuning raises power from 411 to 460 hp (+49 hp, +12%) and torque from 1450 to 1650 Nm (+200 Nm). Diesel engines built in 2000 — the era of classic Common Rail without strong encryption.
Detroit Diesel is part of Daimler Truck. Detroit Diesel is an American diesel-engine manufacturer, founded in 1938. The DD13/15/16 form the current range of Detroit Diesel engines. DPF/SCR with AdBlue is standard on modern Euro-6 truck engines. Truck chip tuning is a discipline of its own, focused on fuel consumption and pulling power rather than peak output. The factory calibration is conservative, leaving headroom for Stage 1 while preserving engine life.
The truck chip tuning community is an industry of its own, focused on long-haul routes. The professional logistics segment tunes for fuel consumption and pulling characteristics. Top MAN units sit at the power ceiling of the European truck segment.
Frequently asked questions
How much horsepower does Stage 1 add for the Detroit Diesel MBE 4000 MBE 4000 12.8L 411hp (302kW) 1450Nm?
Stage 1 chip tuning on the Detroit Diesel MBE 4000 MBE 4000 12.8L 411hp (302kW) 1450Nm boosts engine output by 49 hp: from 411 to 460 hp. Torque rises from 1450 to 1650 Nm (+200 Nm).
What changes in the Detroit Diesel MBE 4000 ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Detroit Diesel MBE 4000 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +49 hp with no hardware changes.
Does Stage 1 make sense on the Detroit Diesel MBE 4000 MBE 4000 12.8L 411hp (302kW) 1450Nm with this much power?
On the top-spec Detroit Diesel MBE 4000 MBE 4000 12.8L 411hp (302kW) 1450Nm engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the Detroit Diesel MBE 4000 MBE 4000 12.8L 411hp (302kW) 1450Nm?
Stage 2 for the Detroit Diesel MBE 4000 MBE 4000 12.8L 411hp (302kW) 1450Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Detroit Diesel MBE 4000 remain valid after Stage 1?
After remapping the Detroit Diesel MBE 4000, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Detroit Diesel MBE 4000?
Reading and writing via OBD takes 25-30 minutes on the Detroit Diesel MBE 4000. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Detroit Diesel MBE 4000?
Before Stage 1 the original of the Detroit Diesel MBE 4000 MBE 4000 12.8L 411hp (302kW) 1450Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Detroit Diesel MBE 4000 MBE 4000 12.8L 411hp (302kW) 1450Nm cost?
The remap price for the Detroit Diesel MBE 4000 MBE 4000 12.8L 411hp (302kW) 1450Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.