DAF XE 280C 12.6L 381hp (280kW) 1750Nm — Stage 1 file (+60 hp)
hp
Stage 1 file for DAF XE 280C 12.6L 381hp (280kW) 1750Nm
Target +0 hp. Custom development for your engine.
Chip tuning for DAF XE 280C 12.6L 381hp (280kW) 1750Nm ECU
DAF XE (I) 280C 12.6L 381hp (280kW) 1750Nm — commercial diesel engine of the commercial segment of the PACCAR (с 1996) group (Нидерланды, 1928). Stage 1 chip tuning raises power from 381 to 441 hp (+60 hp, +16%) and torque from 1750 to 2050 Nm (+300 Nm).
DAF has been part of the American PACCAR group since 1996. DAF is a Dutch truck manufacturer, founded in 1928. The XF, CF and LF are DAF's main series. Mid-generation truck models use standard OBD read/write. Truck diesels carry an extended set of maps for commercial load, with the focus on torque. DPF/SCR with AdBlue is standard on modern Euro-6 truck engines.
The truck chip tuning community is an industry of its own, focused on long-haul routes. The professional logistics segment tunes for fuel consumption and pulling characteristics. Top MAN units sit at the power ceiling of the European truck segment.
Frequently asked questions
What is the Stage 1 effect on the DAF XE 280C 12.6L 381hp (280kW) 1750Nm?
Stage 1 chip tuning on the DAF XE 280C 12.6L 381hp (280kW) 1750Nm boosts engine output by 60 hp: from 381 to 441 hp. Torque rises from 1750 to 2050 Nm (+300 Nm).
What changes in the DAF XE ECU after Stage 1?
Stage 1 chip tuning of the DAF XE is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +60 hp with no hardware changes.
What is the Stage 1 potential of the DAF XE 280C 12.6L 381hp (280kW) 1750Nm?
On the top-spec DAF XE 280C 12.6L 381hp (280kW) 1750Nm engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How much does Stage 2 add on the DAF XE?
Stage 2 for the DAF XE 280C 12.6L 381hp (280kW) 1750Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What happens to the DAF XE warranty after chip tuning?
The factory warranty of the DAF XE does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the DAF XE take?
On the DAF XE 280C 12.6L 381hp (280kW) 1750Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the DAF XE?
Yes, the original ECU firmware of the DAF XE 280C 12.6L 381hp (280kW) 1750Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the DAF XE?
Stage 1 for the DAF XE 280C 12.6L 381hp (280kW) 1750Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.