DAF CF75 PR228 9.2L 310hp (228kW) 1275Nm — Stage 1 file (+60 hp)
hp
Stage 1 file for DAF CF75 PR228 9.2L 310hp (228kW) 1275Nm
Target +0 hp. Custom development for your engine.
Chip tuning for DAF CF75 PR228 9.2L 310hp (228kW) 1275Nm ECU
DAF CF75 (I) PR228 9.2L 310hp (228kW) 1275Nm — commercial diesel engine of the commercial segment of the PACCAR (с 1996) group (Нидерланды, 1928). Stage 1 chip tuning raises power from 310 to 370 hp (+60 hp, +19%) and torque from 1275 to 1520 Nm (+245 Nm).
DAF is a Dutch truck manufacturer, founded in 1928. The XF, CF and LF are DAF's main series. DAF specialises in long-haul tractor units and medium-duty trucks. High-output diesels head the truck segment, and Stage 1 is especially felt in Nm. Mid-generation truck models use standard OBD read/write. Truck diesels carry an extended set of maps for commercial load, with the focus on torque.
On high-output trucks, Stage 1 reduces fuel consumption under load. The professional logistics segment tunes for fuel consumption and pulling characteristics. The truck chip tuning community is an industry of its own, focused on long-haul routes. High-output MAN units are long-haul tractors with solid headroom for Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the DAF CF75 PR228 9.2L 310hp (228kW) 1275Nm?
After Stage 1 the power of the DAF CF75 PR228 9.2L 310hp (228kW) 1275Nm rises from 310 to 370 hp, a gain of 60 hp (+19%). Torque rises from 1275 to 1520 Nm (+245 Nm).
How does Stage 1 differ from stock on the DAF CF75?
Stage 1 is a software optimization of the factory ECU firmware of the DAF CF75 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +60 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the DAF CF75?
The high-output DAF CF75 PR228 9.2L 310hp (228kW) 1275Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the DAF CF75 PR228 9.2L 310hp (228kW) 1275Nm?
Stage 2 on the DAF CF75 PR228 9.2L 310hp (228kW) 1275Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the DAF CF75 remain valid after Stage 1?
After remapping the DAF CF75, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the DAF CF75?
Reading and writing via OBD takes 25-30 minutes on the DAF CF75. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the DAF CF75?
Before Stage 1 the original of the DAF CF75 PR228 9.2L 310hp (228kW) 1275Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the DAF CF75 PR228 9.2L 310hp (228kW) 1275Nm cost?
The remap price for the DAF CF75 PR228 9.2L 310hp (228kW) 1275Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.