DAF CF Euro6 MX13 (EU6) 410hp (301kW) 2000Nm — Stage 1 file (+58 hp)
hp
Stage 1 file for DAF CF Euro6 MX13 (EU6) 410hp (301kW) 2000Nm
Target +0 hp. Custom development for your engine.
Chip tuning for DAF CF Euro6 MX13 (EU6) 410hp (301kW) 2000Nm ECU
DAF CF Euro6 (I) MX13 (EU6) 410hp (301kW) 2000Nm — commercial diesel engine of the commercial segment of the PACCAR (с 1996) group (Нидерланды, 1928). Stage 1 chip tuning raises power from 410 to 468 hp (+58 hp, +14%) and torque from 2000 to 2290 Nm (+290 Nm).
DAF has been part of the American PACCAR group since 1996. DAF is a Dutch truck manufacturer, founded in 1928. The XF, CF and LF are DAF's main series. Mid-generation truck models use standard OBD read/write. Truck diesels carry an extended set of maps for commercial load, with the focus on torque. DPF/SCR with AdBlue is standard on modern Euro-6 truck engines.
The truck chip tuning community is an industry of its own, focused on long-haul routes. The professional logistics segment tunes for fuel consumption and pulling characteristics. Top MAN units sit at the power ceiling of the European truck segment.
Frequently asked questions
How much horsepower does Stage 1 add for the DAF CF Euro6 MX13 (EU6) 410hp (301kW) 2000Nm?
Stage 1 chip tuning on the DAF CF Euro6 MX13 (EU6) 410hp (301kW) 2000Nm boosts engine output by 58 hp: from 410 to 468 hp. Torque rises from 2000 to 2290 Nm (+290 Nm).
What changes in the DAF CF Euro6 ECU after Stage 1?
Stage 1 chip tuning of the DAF CF Euro6 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +58 hp with no hardware changes.
What is the Stage 1 potential of the DAF CF Euro6 MX13 (EU6) 410hp (301kW) 2000Nm?
On the top-spec DAF CF Euro6 MX13 (EU6) 410hp (301kW) 2000Nm engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How much does Stage 2 add on the DAF CF Euro6?
Stage 2 for the DAF CF Euro6 MX13 (EU6) 410hp (301kW) 2000Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What happens to the DAF CF Euro6 warranty after chip tuning?
The factory warranty of the DAF CF Euro6 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the DAF CF Euro6 take?
On the DAF CF Euro6 MX13 (EU6) 410hp (301kW) 2000Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the DAF CF Euro6?
Yes, the original ECU firmware of the DAF CF Euro6 MX13 (EU6) 410hp (301kW) 2000Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the DAF CF Euro6?
Stage 1 for the DAF CF Euro6 MX13 (EU6) 410hp (301kW) 2000Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.