DAF CF Euro6 MX11 (EU6) 330hp (243kW) 1400Nm — Stage 1 file (+38 hp)
hp
Stage 1 file for DAF CF Euro6 MX11 (EU6) 330hp (243kW) 1400Nm
Target +0 hp. Custom development for your engine.
Chip tuning for DAF CF Euro6 MX11 (EU6) 330hp (243kW) 1400Nm ECU
DAF CF Euro6 (I) MX11 (EU6) 330hp (243kW) 1400Nm — commercial diesel engine of the commercial segment of the PACCAR (с 1996) group (Нидерланды, 1928). Stage 1 chip tuning raises power from 330 to 368 hp (+38 hp, +12%) and torque from 1400 to 1585 Nm (+185 Nm).
DAF has been part of the American PACCAR group since 1996. DAF is a Dutch truck manufacturer, founded in 1928. The XF, CF and LF are DAF's main series. Mid-generation truck models use standard OBD read/write. Truck diesels carry an extended set of maps for commercial load, with the focus on torque. DPF/SCR with AdBlue is standard on modern Euro-6 truck engines.
The professional logistics segment tunes for fuel consumption and pulling characteristics. The truck chip tuning community is an industry of its own, focused on long-haul routes. On high-output trucks, Stage 1 reduces fuel consumption under load. High-output MAN units are long-haul tractors with solid headroom for Stage 1.
Frequently asked questions
What power gain do you get after chip tuning the DAF CF Euro6 MX11 (EU6) 330hp (243kW) 1400Nm?
Stage 1 chip tuning on the DAF CF Euro6 MX11 (EU6) 330hp (243kW) 1400Nm boosts engine output by 38 hp: from 330 to 368 hp. Torque rises from 1400 to 1585 Nm (+185 Nm).
What changes in the DAF CF Euro6 ECU after Stage 1?
Stage 1 chip tuning of the DAF CF Euro6 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +38 hp with no hardware changes.
Is Stage 1 safe on the high-output DAF CF Euro6 MX11 (EU6) 330hp (243kW) 1400Nm?
Stage 1 on the powerful DAF CF Euro6 MX11 (EU6) 330hp (243kW) 1400Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How much does Stage 2 add on the DAF CF Euro6?
Stage 2 for the DAF CF Euro6 MX11 (EU6) 330hp (243kW) 1400Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What happens to the DAF CF Euro6 warranty after chip tuning?
The factory warranty of the DAF CF Euro6 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the DAF CF Euro6 take?
On the DAF CF Euro6 MX11 (EU6) 330hp (243kW) 1400Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the DAF CF Euro6?
Yes, the original ECU firmware of the DAF CF Euro6 MX11 (EU6) 330hp (243kW) 1400Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the DAF CF Euro6?
Stage 1 for the DAF CF Euro6 MX11 (EU6) 330hp (243kW) 1400Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.