Dacia Sandero 1.6 E-tech PHEV 160 hp — Stage 1 file
hp
Stage 1 file for Dacia Sandero 1.6 E-tech PHEV 160 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Dacia Sandero 1.6 E-tech PHEV 160 hp ECU
Dacia Sandero (2020 - III) 1.6 E-tech PHEV 160 hp — mass-market hybrid engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance (через Renault) group (Румыния, 1966).
Dacia is a mass-market budget brand of the Renault-Nissan alliance. The Logan, Sandero and Duster are Dacia's iconic mass-market models. Dacia is a Romanian carmaker, founded in 1966 and owned by Renault since 1999. The Dacia Jogger Hybrid is a hybrid estate built on Renault's E-Tech technology. The Dacia Spring is a mass-market budget EV on the Renault platform.
Within the Renault-Nissan Alliance, ECUs are standardised, so Dacia files often work on Renault. The Dacia community in Eastern Europe and the CIS enjoys a large library of ready-made Stage files. Mid-range Dacias are a high-volume chip tuning subject in Eastern Europe.
Frequently asked questions
What does a Stage 1 remap of the Dacia Sandero 1.6 E-tech PHEV 160 hp include?
Stage 1 on the Dacia Sandero 1.6 E-tech PHEV 160 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved.
Is a Stage 1 remap safe for the 1.6 E-tech PHEV 160 hp?
Stage 1 on the Dacia Sandero 1.6 E-tech PHEV 160 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Dacia Sandero 1.6 E-tech PHEV 160 hp?
Stage 2 for the Dacia Sandero 1.6 E-tech PHEV 160 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Dacia Sandero?
Stage 1 on the Dacia Sandero voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Dacia Sandero 1.6 E-tech PHEV 160 hp done?
The full remap cycle for the Dacia Sandero — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Dacia Sandero?
The original Dacia Sandero ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Dacia Sandero 1.6 E-tech PHEV 160 hp?
The cost of Stage 1 for the Dacia Sandero 1.6 E-tech PHEV 160 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.