Dacia Sandero 1.0 SCe 75 hp — Stage 1 file (+5 hp)
hp
Stage 1 file for Dacia Sandero 1.0 SCe 75 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Dacia Sandero 1.0 SCe 75 hp ECU
Dacia Sandero (2012 - II) 1.0 SCe 75 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance (через Renault) group (Румыния, 1966). Stage 1 chip tuning raises power from 75 to 80 hp (+5 hp, +7%) and torque from 95 to 100 Nm (+5 Nm). ECU — Siemens/Continental EMS3125. Flashing method: OBD or Bench depending on the unit's protection. The 2012 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Dacia positions itself as an affordable alternative to Renault — the same quality at a lower price. Dacia is a mass-market budget brand of the Renault-Nissan alliance. The Logan, Sandero and Duster are Dacia's iconic mass-market models. Dacia uses Renault's TCe turbo-petrol engines. Low-output Dacia petrol engines are naturally aspirated city-segment units.
The Dacia community in Eastern Europe and the CIS enjoys a large library of ready-made Stage files. Within the Renault-Nissan Alliance, ECUs are standardised, so Dacia files often work on Renault. Low-output Dacia engines are city-segment units; Stage 1 is safe.
Frequently asked questions
What is the Stage 1 effect on the Dacia Sandero 1.0 SCe 75 hp?
After Stage 1 the power of the Dacia Sandero 1.0 SCe 75 hp rises from 75 to 80 hp, a gain of 5 hp (+7%). Torque rises from 95 to 100 Nm (+5 Nm).
How does Stage 1 differ from stock on the Dacia Sandero?
Stage 1 is a software optimization of the factory ECU firmware of the Dacia Sandero with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +5 hp with no hardware changes.
Is Stage 1 worth doing on the base Dacia Sandero?
Stage 1 on the base Dacia Sandero is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Dacia Sandero 1.0 SCe 75 hp?
Stage 2 on the Dacia Sandero 1.0 SCe 75 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Dacia Sandero 1.0 SCe 75 hp use?
The Dacia Sandero 1.0 SCe 75 hp is fitted with the Siemens/Continental EMS3125 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Dacia Sandero remain valid after Stage 1?
After remapping the Dacia Sandero, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Dacia Sandero?
Reading and writing via OBD takes 25-30 minutes on the Dacia Sandero. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Dacia Sandero?
Before Stage 1 the original of the Dacia Sandero 1.0 SCe 75 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Dacia Sandero 1.0 SCe 75 hp cost?
The remap price for the Dacia Sandero 1.0 SCe 75 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.