Dacia Sandero 1.0 SCe 73 hp — Stage 1 file (+4 hp)
hp
Stage 1 file for Dacia Sandero 1.0 SCe 73 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Dacia Sandero 1.0 SCe 73 hp ECU
Dacia Sandero (2012 - II) 1.0 SCe 73 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance (через Renault) group (Румыния, 1966). Stage 1 chip tuning raises power from 73 to 77 hp (+4 hp, +5%) and torque from 97 to 100 Nm (+3 Nm). ECU — Bosch ME17.9.20. Flashing method: OBD or Bench depending on the unit's protection. A petrol engine built in 2012 — a Tricore platform without strong protection; OBD access works.
Dacia is a mass-market budget brand of the Renault-Nissan alliance. The Logan, Sandero and Duster are Dacia's iconic mass-market models. Dacia is a Romanian carmaker, founded in 1966 and owned by Renault since 1999. Low-output Dacia petrol engines are naturally aspirated city-segment units. Dacia uses Renault's TCe turbo-petrol engines.
Within the Renault-Nissan Alliance, ECUs are standardised, so Dacia files often work on Renault. The Dacia community in Eastern Europe and the CIS enjoys a large library of ready-made Stage files. Low-output Dacia engines are city-segment units; Stage 1 is safe.
Frequently asked questions
What power gain do you get after chip tuning the Dacia Sandero 1.0 SCe 73 hp?
Stage 1 chip tuning on the Dacia Sandero 1.0 SCe 73 hp boosts engine output by 4 hp: from 73 to 77 hp. Torque rises from 97 to 100 Nm (+3 Nm).
What changes in the Dacia Sandero ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Dacia Sandero with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +4 hp with no hardware changes.
Is Stage 1 worth doing on the base Dacia Sandero?
Yes, Stage 1 on the low-output Dacia Sandero 1.0 SCe 73 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Dacia Sandero 1.0 SCe 73 hp?
Stage 2 for the Dacia Sandero 1.0 SCe 73 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Dacia Sandero 1.0 SCe 73 hp use?
The Dacia Sandero 1.0 SCe 73 hp is fitted with the Bosch ME17.9.20 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Dacia Sandero remain valid after Stage 1?
After remapping the Dacia Sandero, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Dacia Sandero?
Reading and writing via OBD takes 25-30 minutes on the Dacia Sandero. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Dacia Sandero?
Before Stage 1 the original of the Dacia Sandero 1.0 SCe 73 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Dacia Sandero 1.0 SCe 73 hp cost?
The remap price for the Dacia Sandero 1.0 SCe 73 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.