Dacia Sandero 0.9 TCE 90 hp — Stage 1 file (+15 hp)
hp
Stage 1 file for Dacia Sandero 0.9 TCE 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Dacia Sandero 0.9 TCE 90 hp ECU
Dacia Sandero (2012 - II) 0.9 TCE 90 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance (через Renault) group (Румыния, 1966). Stage 1 chip tuning raises power from 90 to 105 hp (+15 hp, +17%) and torque from 135 to 165 Nm (+30 Nm). This engine ships with different ECU variants: Siemens/Continental EMS3125, Siemens/Continental EMS3140, Siemens/Continental EMS3150, Valeo V50.1. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 4 ECU variants. The 2012 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
The Logan, Sandero and Duster are Dacia's iconic mass-market models. Dacia is a Romanian carmaker, founded in 1966 and owned by Renault since 1999. Dacia uses Renault engines and platforms. Dacia uses Renault's TCe turbo-petrol engines. Low-output Dacia petrol engines are naturally aspirated city-segment units.
The Dacia community in Eastern Europe and the CIS enjoys a large library of ready-made Stage files. Within the Renault-Nissan Alliance, ECUs are standardised, so Dacia files often work on Renault. Low-output Dacia engines are city-segment units; Stage 1 is safe.
Frequently asked questions
How many horsepower does the Dacia Sandero 0.9 TCE 90 hp reach after a remap?
After Stage 1 the power of the Dacia Sandero 0.9 TCE 90 hp rises from 90 to 105 hp, a gain of 15 hp (+17%). Torque rises from 135 to 165 Nm (+30 Nm).
How does Stage 1 differ from stock on the Dacia Sandero?
Stage 1 chip tuning of the Dacia Sandero is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +15 hp with no hardware changes.
What does chip tuning give on the low-output Dacia Sandero 0.9 TCE 90 hp?
Stage 1 on the base Dacia Sandero is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How much does Stage 2 add on the Dacia Sandero?
Stage 2 on the Dacia Sandero 0.9 TCE 90 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Dacia Sandero 0.9 TCE 90 hp?
The Dacia Sandero 0.9 TCE 90 hp was fitted with different ECUs depending on the year and trim: Siemens/Continental EMS3125, Siemens/Continental EMS3140, Siemens/Continental EMS3150, Valeo V50.1. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Dacia Sandero warranty after chip tuning?
The factory warranty of the Dacia Sandero does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Dacia Sandero take?
On the Dacia Sandero 0.9 TCE 90 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Dacia Sandero?
Yes, the original ECU firmware of the Dacia Sandero 0.9 TCE 90 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Dacia Sandero?
Stage 1 for the Dacia Sandero 0.9 TCE 90 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.