Dacia Logan 1.4 MPI 75 hp — Stage 1 file (+5 hp)
hp
Stage 1 file for Dacia Logan 1.4 MPI 75 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Dacia Logan 1.4 MPI 75 hp ECU
Dacia Logan (2007) 1.4 MPI 75 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance (через Renault) group (Румыния, 1966). Stage 1 chip tuning raises power from 75 to 80 hp (+5 hp, +7%) and torque from 112 to 120 Nm (+8 Nm). This engine ships with different ECU variants: Siemens/Continental EMS3132, Siemens/Continental SIRIUS 32. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A petrol engine built in 2007 — the era before widespread firmware encryption, OBD flash without complications.
Dacia uses Renault engines and platforms. Dacia positions itself as an affordable alternative to Renault — the same quality at a lower price. Dacia is a mass-market budget brand of the Renault-Nissan alliance. Low-output Dacia petrol engines are naturally aspirated city-segment units. Dacia uses Renault's TCe turbo-petrol engines.
Within the Renault-Nissan Alliance, ECUs are standardised, so Dacia files often work on Renault. The Dacia community in Eastern Europe and the CIS enjoys a large library of ready-made Stage files. Low-output Dacia engines are city-segment units; Stage 1 is safe.
Frequently asked questions
How much does the power of the Dacia Logan 1.4 MPI 75 hp increase after Stage 1?
Stage 1 for the Dacia Logan 1.4 MPI 75 hp adds +5 hp — power increases from 75 to 80 hp (+7%). Torque rises from 112 to 120 Nm (+8 Nm).
What does a Stage 1 remap of the Dacia Logan 1.4 MPI 75 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Dacia Logan with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +5 hp with no hardware changes.
Is Stage 1 worth doing on the base Dacia Logan?
Yes, Stage 1 on the low-output Dacia Logan 1.4 MPI 75 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Dacia Logan 1.4 MPI 75 hp?
Stage 2 for the Dacia Logan 1.4 MPI 75 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Dacia Logan 1.4 MPI 75 hp built with?
The Dacia Logan 1.4 MPI 75 hp comes with 2 ECU variants: Siemens/Continental EMS3132, Siemens/Continental SIRIUS 32. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Dacia Logan remain valid after Stage 1?
After remapping the Dacia Logan, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Dacia Logan?
Reading and writing via OBD takes 25-30 minutes on the Dacia Logan. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Dacia Logan?
Before Stage 1 the original of the Dacia Logan 1.4 MPI 75 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Dacia Logan 1.4 MPI 75 hp cost?
The remap price for the Dacia Logan 1.4 MPI 75 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.