Dacia Jogger 1.6 SCE 140 hp — Stage 1 file
hp
Stage 1 file for Dacia Jogger 1.6 SCE 140 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Dacia Jogger 1.6 SCE 140 hp ECU
Dacia Jogger (2022) 1.6 SCE 140 hp — mass-market hybrid engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance (через Renault) group (Румыния, 1966).
The Logan, Sandero and Duster are Dacia's iconic mass-market models. Dacia is a Romanian carmaker, founded in 1966 and owned by Renault since 1999. Dacia uses Renault engines and platforms. The Dacia Jogger Hybrid is a hybrid estate built on Renault's E-Tech technology. The Dacia Spring is a mass-market budget EV on the Renault platform.
Within the Renault-Nissan Alliance, ECUs are standardised, so Dacia files often work on Renault. The Dacia community in Eastern Europe and the CIS enjoys a large library of ready-made Stage files. Mid-range Dacias are a high-volume chip tuning subject in Eastern Europe.
Frequently asked questions
What changes in the Dacia Jogger ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Dacia Jogger with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed.
What is the risk of Stage 1 on the Dacia Jogger 1.6 SCE 140 hp?
A remap of the Dacia Jogger 1.6 SCE 140 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Dacia Jogger 1.6 SCE 140 hp?
Stage 2 for the Dacia Jogger 1.6 SCE 140 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Dacia Jogger remain valid after Stage 1?
After remapping the Dacia Jogger, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Dacia Jogger?
Reading and writing via OBD takes 25-30 minutes on the Dacia Jogger. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Dacia Jogger?
Before Stage 1 the original of the Dacia Jogger 1.6 SCE 140 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Dacia Jogger 1.6 SCE 140 hp cost?
The remap price for the Dacia Jogger 1.6 SCE 140 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.