Dacia Jogger 1.0 TCE 110 hp — Stage 1 file (+10 hp)
hp
Stage 1 file for Dacia Jogger 1.0 TCE 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Dacia Jogger 1.0 TCE 110 hp ECU
Dacia Jogger (2022) 1.0 TCE 110 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance (через Renault) group (Румыния, 1966). Stage 1 chip tuning raises power from 110 to 120 hp (+10 hp, +9%) and torque from 200 to 220 Nm (+20 Nm). This engine ships with different ECU variants: Siemens/Continental EMS3141, Siemens/Continental EMS3161. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A 2022 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
Dacia uses Renault engines and platforms. Dacia positions itself as an affordable alternative to Renault — the same quality at a lower price. Dacia is a mass-market budget brand of the Renault-Nissan alliance. On Dacia turbo petrol engines, Stage 1 delivers a noticeable gain. Dacia uses Renault's TCe turbo-petrol engines.
On the Dacia TCe, Stage 1 delivers a noticeable gain. The Dacia community in Eastern Europe and the CIS enjoys a large library of ready-made Stage files. Within the Renault-Nissan Alliance, ECUs are standardised, so Dacia files often work on Renault. Mid-range Dacias are a high-volume chip tuning subject in Eastern Europe.
Frequently asked questions
How much does the power of the Dacia Jogger 1.0 TCE 110 hp increase after Stage 1?
Stage 1 chip tuning on the Dacia Jogger 1.0 TCE 110 hp boosts engine output by 10 hp: from 110 to 120 hp. Torque rises from 200 to 220 Nm (+20 Nm).
What changes in the Dacia Jogger ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Dacia Jogger with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +10 hp with no hardware changes.
What is the risk of Stage 1 on the Dacia Jogger 1.0 TCE 110 hp?
A remap of the Dacia Jogger 1.0 TCE 110 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Dacia Jogger 1.0 TCE 110 hp?
Stage 2 for the Dacia Jogger 1.0 TCE 110 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Dacia Jogger 1.0 TCE 110 hp built with?
The Dacia Jogger 1.0 TCE 110 hp comes with 2 ECU variants: Siemens/Continental EMS3141, Siemens/Continental EMS3161. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Dacia Jogger remain valid after Stage 1?
After remapping the Dacia Jogger, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Dacia Jogger?
Reading and writing via OBD takes 25-30 minutes on the Dacia Jogger. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Dacia Jogger?
Before Stage 1 the original of the Dacia Jogger 1.0 TCE 110 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Dacia Jogger 1.0 TCE 110 hp cost?
The remap price for the Dacia Jogger 1.0 TCE 110 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.