Dacia Jogger 1.0 ECO-G 100 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Dacia Jogger 1.0 ECO-G 100 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Dacia Jogger 1.0 ECO-G 100 hp ECU
Dacia Jogger (2022) 1.0 ECO-G 100 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance (через Renault) group (Румыния, 1966). Stage 1 chip tuning raises power from 100 to 120 hp (+20 hp, +20%) and torque from 160 to 220 Nm (+60 Nm). This engine ships with different ECU variants: Siemens/Continental EMS3140, Siemens/Continental EMS3141. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A 2022 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
The Logan, Sandero and Duster are Dacia's iconic mass-market models. Dacia is a Romanian carmaker, founded in 1966 and owned by Renault since 1999. Dacia uses Renault engines and platforms. On Dacia turbo petrol engines, Stage 1 delivers a noticeable gain. Dacia uses Renault's TCe turbo-petrol engines.
Within the Renault-Nissan Alliance, ECUs are standardised, so Dacia files often work on Renault. On the Dacia TCe, Stage 1 delivers a noticeable gain. The Dacia community in Eastern Europe and the CIS enjoys a large library of ready-made Stage files. Mid-range Dacias are a high-volume chip tuning subject in Eastern Europe.
Frequently asked questions
How many horsepower does the Dacia Jogger 1.0 ECO-G 100 hp reach after a remap?
Stage 1 for the Dacia Jogger 1.0 ECO-G 100 hp adds +20 hp — power increases from 100 to 120 hp (+20%). Torque rises from 160 to 220 Nm (+60 Nm).
What does a Stage 1 remap of the Dacia Jogger 1.0 ECO-G 100 hp include?
Stage 1 on the Dacia Jogger 1.0 ECO-G 100 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.0 ECO-G 100 hp?
Stage 1 on the Dacia Jogger 1.0 ECO-G 100 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Dacia Jogger 1.0 ECO-G 100 hp?
Stage 2 for the Dacia Jogger 1.0 ECO-G 100 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the Dacia Jogger 1.0 ECO-G 100 hp have?
The Dacia Jogger 1.0 ECO-G 100 hp has 2 ECU variants: Siemens/Continental EMS3140, Siemens/Continental EMS3141. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Dacia Jogger?
Stage 1 on the Dacia Jogger voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Dacia Jogger 1.0 ECO-G 100 hp done?
The full remap cycle for the Dacia Jogger — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Dacia Jogger?
The original Dacia Jogger ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Dacia Jogger 1.0 ECO-G 100 hp?
The cost of Stage 1 for the Dacia Jogger 1.0 ECO-G 100 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.