Dacia Duster 1.5 Blue DCI EU6d 115 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Dacia Duster 1.5 Blue DCI EU6d 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Dacia Duster 1.5 Blue DCI EU6d 115 hp ECU
Dacia Duster (2018 - II) 1.5 Blue DCI EU6d 115 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance (через Renault) group (Румыния, 1966). Stage 1 chip tuning raises power from 115 to 140 hp (+25 hp, +22%) and torque from 260 to 300 Nm (+40 Nm). ECU — Bosch MD1CS006. Flashing method: OBD or Bench depending on the unit's protection. A 2018 diesel — a modern platform protected by RSA + checksum encryption; top models require BDM/JTAG.
Dacia is a mass-market budget brand of the Renault-Nissan alliance. The Logan, Sandero and Duster are Dacia's iconic mass-market models. Dacia is a Romanian carmaker, founded in 1966 and owned by Renault since 1999. DPF/SCR with AdBlue is standard on Euro-6 Dacia diesels. Dacia uses Renault's dCi diesel engines. Mid-range Dacia diesels are a mainstream Stage 1 subject.
Within the Renault-Nissan Alliance, ECUs are standardised, so Dacia files often work on Renault. On the Dacia dCi, Stage 1 delivers a noticeable torque gain. The Dacia community in Eastern Europe and the CIS enjoys a large library of ready-made Stage files. Mid-range Dacias are a high-volume chip tuning subject in Eastern Europe.
Frequently asked questions
What power gain do you get after chip tuning the Dacia Duster 1.5 Blue DCI EU6d 115 hp?
Stage 1 chip tuning on the Dacia Duster 1.5 Blue DCI EU6d 115 hp boosts engine output by 25 hp: from 115 to 140 hp. Torque rises from 260 to 300 Nm (+40 Nm).
What changes in the Dacia Duster ECU after Stage 1?
Stage 1 on the Dacia Duster 1.5 Blue DCI EU6d 115 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +25 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.5 Blue DCI EU6d 115 hp?
Stage 1 on the Dacia Duster 1.5 Blue DCI EU6d 115 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Dacia Duster 1.5 Blue DCI EU6d 115 hp?
Stage 2 for the Dacia Duster 1.5 Blue DCI EU6d 115 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Dacia Duster 1.5 Blue DCI EU6d 115 hp run?
The control unit of the Dacia Duster 1.5 Blue DCI EU6d 115 hp is the Bosch MD1CS006. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Dacia Duster?
Stage 1 on the Dacia Duster voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Dacia Duster 1.5 Blue DCI EU6d 115 hp done?
The full remap cycle for the Dacia Duster — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Dacia Duster?
The original Dacia Duster ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Dacia Duster 1.5 Blue DCI EU6d 115 hp?
The cost of Stage 1 for the Dacia Duster 1.5 Blue DCI EU6d 115 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.