Dacia Duster 1.5 DCI EU5 90 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Dacia Duster 1.5 DCI EU5 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Dacia Duster 1.5 DCI EU5 90 hp ECU
Dacia Duster (2009 - I) 1.5 DCI EU5 90 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance (через Renault) group (Румыния, 1966). Stage 1 chip tuning raises power from 90 to 110 hp (+20 hp, +22%) and torque from 220 to 250 Nm (+30 Nm). ECU — Bosch EDC17C42. Flashing method: OBD or Bench depending on the unit's protection. The 2009 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Dacia is a mass-market budget brand of the Renault-Nissan alliance. The Logan, Sandero and Duster are Dacia's iconic mass-market models. Dacia is a Romanian carmaker, founded in 1966 and owned by Renault since 1999. DPF/SCR with AdBlue is standard on Euro-6 Dacia diesels. On low-output Dacia dCi engines, Stage 1 is safe. Dacia uses Renault's dCi diesel engines.
The Dacia community in Eastern Europe and the CIS enjoys a large library of ready-made Stage files. Within the Renault-Nissan Alliance, ECUs are standardised, so Dacia files often work on Renault. Low-output Dacia engines are city-segment units; Stage 1 is safe.
Frequently asked questions
What power gain do you get after chip tuning the Dacia Duster 1.5 DCI EU5 90 hp?
After Stage 1 the power of the Dacia Duster 1.5 DCI EU5 90 hp rises from 90 to 110 hp, a gain of 20 hp (+22%). Torque rises from 220 to 250 Nm (+30 Nm).
How does Stage 1 differ from stock on the Dacia Duster?
Stage 1 is a software optimization of the factory ECU firmware of the Dacia Duster with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
Is Stage 1 worth doing on the base Dacia Duster?
Stage 1 on the base Dacia Duster is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Dacia Duster 1.5 DCI EU5 90 hp?
Stage 2 on the Dacia Duster 1.5 DCI EU5 90 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Dacia Duster 1.5 DCI EU5 90 hp use?
The Dacia Duster 1.5 DCI EU5 90 hp is fitted with the Bosch EDC17C42 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Dacia Duster remain valid after Stage 1?
After remapping the Dacia Duster, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Dacia Duster?
Reading and writing via OBD takes 25-30 minutes on the Dacia Duster. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Dacia Duster?
Before Stage 1 the original of the Dacia Duster 1.5 DCI EU5 90 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Dacia Duster 1.5 DCI EU5 90 hp cost?
The remap price for the Dacia Duster 1.5 DCI EU5 90 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.