Dacia Dokker 1.5 Blue DCI EU6d 95 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Dacia Dokker 1.5 Blue DCI EU6d 95 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Dacia Dokker 1.5 Blue DCI EU6d 95 hp ECU
Dacia Dokker (2017) 1.5 Blue DCI EU6d 95 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance (через Renault) group (Румыния, 1966). Stage 1 chip tuning raises power from 95 to 120 hp (+25 hp, +26%) and torque from 240 to 280 Nm (+40 Nm). ECU — Bosch MD1CS006. Flashing method: OBD or Bench depending on the unit's protection. The 2017 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Dacia positions itself as an affordable alternative to Renault — the same quality at a lower price. Dacia is a mass-market budget brand of the Renault-Nissan alliance. The Logan, Sandero and Duster are Dacia's iconic mass-market models. Mid-generation diesel models use standard OBD. DPF/SCR with AdBlue is standard on Euro-6 Dacia diesels. On low-output Dacia dCi engines, Stage 1 is safe.
The Dacia community in Eastern Europe and the CIS enjoys a large library of ready-made Stage files. Within the Renault-Nissan Alliance, ECUs are standardised, so Dacia files often work on Renault. Low-output Dacia engines are city-segment units; Stage 1 is safe.
Frequently asked questions
What is the Stage 1 effect on the Dacia Dokker 1.5 Blue DCI EU6d 95 hp?
After Stage 1 the power of the Dacia Dokker 1.5 Blue DCI EU6d 95 hp rises from 95 to 120 hp, a gain of 25 hp (+26%). Torque rises from 240 to 280 Nm (+40 Nm).
How does Stage 1 differ from stock on the Dacia Dokker?
Stage 1 chip tuning of the Dacia Dokker is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +25 hp with no hardware changes.
What does chip tuning give on the low-output Dacia Dokker 1.5 Blue DCI EU6d 95 hp?
Stage 1 on the base Dacia Dokker is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How much does Stage 2 add on the Dacia Dokker?
Stage 2 on the Dacia Dokker 1.5 Blue DCI EU6d 95 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECU is fitted to the Dacia Dokker 1.5 Blue DCI EU6d 95 hp?
The Dacia Dokker 1.5 Blue DCI EU6d 95 hp ECU is the Bosch MD1CS006. Production versions support OBD access; locked variants require Bench (BDM/JTAG).
What happens to the Dacia Dokker warranty after chip tuning?
The factory warranty of the Dacia Dokker does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Dacia Dokker take?
On the Dacia Dokker 1.5 Blue DCI EU6d 95 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Dacia Dokker?
Yes, the original ECU firmware of the Dacia Dokker 1.5 Blue DCI EU6d 95 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Dacia Dokker?
Stage 1 for the Dacia Dokker 1.5 Blue DCI EU6d 95 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.