Dacia Dokker 1.5 Blue DCI EU6d 75 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Dacia Dokker 1.5 Blue DCI EU6d 75 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Dacia Dokker 1.5 Blue DCI EU6d 75 hp ECU
Dacia Dokker (2017) 1.5 Blue DCI EU6d 75 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance (через Renault) group (Румыния, 1966). Stage 1 chip tuning raises power from 75 to 100 hp (+25 hp, +33%) and torque from 200 to 260 Nm (+60 Nm). ECU — Bosch MD1CS006. Flashing method: OBD or Bench depending on the unit's protection. The 2017 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Dacia positions itself as an affordable alternative to Renault — the same quality at a lower price. Dacia is a mass-market budget brand of the Renault-Nissan alliance. The Logan, Sandero and Duster are Dacia's iconic mass-market models. Mid-generation diesel models use standard OBD. DPF/SCR with AdBlue is standard on Euro-6 Dacia diesels. On low-output Dacia dCi engines, Stage 1 is safe.
The Dacia community in Eastern Europe and the CIS enjoys a large library of ready-made Stage files. Within the Renault-Nissan Alliance, ECUs are standardised, so Dacia files often work on Renault. Low-output Dacia engines are city-segment units; Stage 1 is safe.
Frequently asked questions
What is the Stage 1 effect on the Dacia Dokker 1.5 Blue DCI EU6d 75 hp?
The Stage 1 gain for the Dacia Dokker 1.5 Blue DCI EU6d 75 hp is 25 hp (+33%) over the stock 75 hp, for a total of 100 hp. Torque rises from 200 to 260 Nm (+60 Nm).
What is Stage 1 chip tuning for the Dacia Dokker?
Stage 1 is a software optimization of the factory ECU firmware of the Dacia Dokker with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
Is Stage 1 worth doing on the base Dacia Dokker?
Stage 1 on the base Dacia Dokker is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Dacia Dokker 1.5 Blue DCI EU6d 75 hp?
Stage 2 on the Dacia Dokker 1.5 Blue DCI EU6d 75 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Dacia Dokker 1.5 Blue DCI EU6d 75 hp use?
The Dacia Dokker 1.5 Blue DCI EU6d 75 hp is fitted with the Bosch MD1CS006 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Dacia Dokker remain valid after Stage 1?
After remapping the Dacia Dokker, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Dacia Dokker?
Reading and writing via OBD takes 25-30 minutes on the Dacia Dokker. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Dacia Dokker?
Before Stage 1 the original of the Dacia Dokker 1.5 Blue DCI EU6d 75 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Dacia Dokker 1.5 Blue DCI EU6d 75 hp cost?
The remap price for the Dacia Dokker 1.5 Blue DCI EU6d 75 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.