Dacia Dokker 1.2 TCE EU5 115 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Dacia Dokker 1.2 TCE EU5 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Dacia Dokker 1.2 TCE EU5 115 hp ECU
Dacia Dokker (2012) 1.2 TCE EU5 115 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance (через Renault) group (Румыния, 1966). Stage 1 chip tuning raises power from 115 to 135 hp (+20 hp, +17%) and torque from 190 to 230 Nm (+40 Nm). This engine ships with different ECU variants: Siemens/Continental EMS3150, Siemens/Continental EMS3155. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2012 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
The Logan, Sandero and Duster are Dacia's iconic mass-market models. Dacia is a Romanian carmaker, founded in 1966 and owned by Renault since 1999. Dacia uses Renault engines and platforms. Dacia uses Renault's TCe turbo-petrol engines. On Dacia turbo petrol engines, Stage 1 delivers a noticeable gain.
Within the Renault-Nissan Alliance, ECUs are standardised, so Dacia files often work on Renault. On the Dacia TCe, Stage 1 delivers a noticeable gain. The Dacia community in Eastern Europe and the CIS enjoys a large library of ready-made Stage files. Mid-range Dacias are a high-volume chip tuning subject in Eastern Europe.
Frequently asked questions
How many horsepower does the Dacia Dokker 1.2 TCE EU5 115 hp reach after a remap?
After Stage 1 the power of the Dacia Dokker 1.2 TCE EU5 115 hp rises from 115 to 135 hp, a gain of 20 hp (+17%). Torque rises from 190 to 230 Nm (+40 Nm).
How does Stage 1 differ from stock on the Dacia Dokker?
Stage 1 on the Dacia Dokker 1.2 TCE EU5 115 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.2 TCE EU5 115 hp?
Stage 1 on the Dacia Dokker 1.2 TCE EU5 115 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Dacia Dokker 1.2 TCE EU5 115 hp?
Stage 2 on the Dacia Dokker 1.2 TCE EU5 115 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the Dacia Dokker 1.2 TCE EU5 115 hp have?
The Dacia Dokker 1.2 TCE EU5 115 hp has 2 ECU variants: Siemens/Continental EMS3150, Siemens/Continental EMS3155. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Dacia Dokker?
Stage 1 on the Dacia Dokker voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Dacia Dokker 1.2 TCE EU5 115 hp done?
The full remap cycle for the Dacia Dokker — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Dacia Dokker?
The original Dacia Dokker ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Dacia Dokker 1.2 TCE EU5 115 hp?
The cost of Stage 1 for the Dacia Dokker 1.2 TCE EU5 115 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.