Dacia Dokker 1.2 TCE 125 hp — Stage 1 file (+15 hp)
hp
Stage 1 file for Dacia Dokker 1.2 TCE 125 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Dacia Dokker 1.2 TCE 125 hp ECU
Dacia Dokker (2012) 1.2 TCE 125 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance (через Renault) group (Румыния, 1966). Stage 1 chip tuning raises power from 125 to 140 hp (+15 hp, +12%) and torque from 205 to 230 Nm (+25 Nm). This engine ships with different ECU variants: Siemens/Continental EMS3110, Siemens/Continental EMS3125. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A petrol engine built in 2012 — a Tricore platform without strong protection; OBD access works.
Dacia positions itself as an affordable alternative to Renault — the same quality at a lower price. Dacia is a mass-market budget brand of the Renault-Nissan alliance. The Logan, Sandero and Duster are Dacia's iconic mass-market models. On Dacia turbo petrol engines, Stage 1 delivers a noticeable gain. Dacia uses Renault's TCe turbo-petrol engines.
Within the Renault-Nissan Alliance, ECUs are standardised, so Dacia files often work on Renault. On the Dacia TCe, Stage 1 delivers a noticeable gain. The Dacia community in Eastern Europe and the CIS enjoys a large library of ready-made Stage files. Mid-range Dacias are a high-volume chip tuning subject in Eastern Europe.
Frequently asked questions
What is the Stage 1 effect on the Dacia Dokker 1.2 TCE 125 hp?
Stage 1 chip tuning on the Dacia Dokker 1.2 TCE 125 hp boosts engine output by 15 hp: from 125 to 140 hp. Torque rises from 205 to 230 Nm (+25 Nm).
What changes in the Dacia Dokker ECU after Stage 1?
Stage 1 on the Dacia Dokker 1.2 TCE 125 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +15 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.2 TCE 125 hp?
Stage 1 on the Dacia Dokker 1.2 TCE 125 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Dacia Dokker 1.2 TCE 125 hp?
Stage 2 for the Dacia Dokker 1.2 TCE 125 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the Dacia Dokker 1.2 TCE 125 hp have?
The Dacia Dokker 1.2 TCE 125 hp has 2 ECU variants: Siemens/Continental EMS3110, Siemens/Continental EMS3125. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Dacia Dokker?
Stage 1 on the Dacia Dokker voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Dacia Dokker 1.2 TCE 125 hp done?
The full remap cycle for the Dacia Dokker — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Dacia Dokker?
The original Dacia Dokker ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Dacia Dokker 1.2 TCE 125 hp?
The cost of Stage 1 for the Dacia Dokker 1.2 TCE 125 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.