Cummins QSX 360 14.95L 362hp (266kW) 1652Nm — Stage 1 file (+68 hp)
hp
Stage 1 file for Cummins QSX 360 14.95L 362hp (266kW) 1652Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Cummins QSX 360 14.95L 362hp (266kW) 1652Nm ECU
Cummins QSX (I) 360 14.95L 362hp (266kW) 1652Nm — industrial diesel engine of the commercial segment of the Cummins Inc. group (США, 1919). Stage 1 chip tuning raises power from 362 to 430 hp (+68 hp, +19%) and torque from 1652 to 1942 Nm (+290 Nm).
The Cummins ECU is a locked platform, tuned through specialised tooling. Cummins is the world leader in heavy-duty diesel-engine production volume. The Cummins ISX is the flagship for Class 8 heavy trucks. The top Cummins ISX marks the power ceiling for American trucks. The Cummins CM850/CM870/CM2350 ECUs are a proprietary platform. DPF/SCR with AdBlue is standard on modern Cummins engines.
Cummins confidently reaches Stage 2 with hardware (turbos, injectors). The Cummins ECU is a locked platform requiring specialised tooling. EFILive, MM3 and MiniMax are the main tools for Cummins (not the standard WinOLS). The top Cummins ISX engines mark the power ceiling of the American truck segment.
Frequently asked questions
What is the Stage 1 effect on the Cummins QSX 360 14.95L 362hp (266kW) 1652Nm?
Stage 1 for the Cummins QSX 360 14.95L 362hp (266kW) 1652Nm adds +68 hp — power increases from 362 to 430 hp (+19%). Torque rises from 1652 to 1942 Nm (+290 Nm).
What does a Stage 1 remap of the Cummins QSX 360 14.95L 362hp (266kW) 1652Nm include?
Stage 1 on the Cummins QSX 360 14.95L 362hp (266kW) 1652Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +68 hp with no hardware changes.
What does Stage 1 give on the top-spec Cummins QSX 360 14.95L 362hp (266kW) 1652Nm?
On the top-spec Cummins QSX 360 14.95L 362hp (266kW) 1652Nm engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How does Stage 2 differ from Stage 1 on the Cummins QSX 360 14.95L 362hp (266kW) 1652Nm?
Stage 2 for the Cummins QSX 360 14.95L 362hp (266kW) 1652Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Cummins QSX?
Stage 1 on the Cummins QSX voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Cummins QSX 360 14.95L 362hp (266kW) 1652Nm done?
The full remap cycle for the Cummins QSX — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Cummins QSX?
The original Cummins QSX ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Cummins QSX 360 14.95L 362hp (266kW) 1652Nm?
The cost of Stage 1 for the Cummins QSX 360 14.95L 362hp (266kW) 1652Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.