Claas Xerion 5000 479hp (382kW) 2300Nm — Stage 1 file (+52 hp)
hp
Stage 1 file for Claas Xerion 5000 479hp (382kW) 2300Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Claas Xerion 5000 479hp (382kW) 2300Nm ECU
Claas Xerion (I) 5000 479hp (382kW) 2300Nm — agricultural diesel engine of the agricultural segment of the Claas Group group (Германия, 1913). Stage 1 chip tuning raises power from 520 to 572 hp (+52 hp, +10%) and torque from 2450 to 2638 Nm (+188 Nm).
The Claas Lexion is the flagship combine harvester. Claas is a German agricultural-machinery maker, founded in 1913. Claas is an independent family-owned company and a leader in combine harvesters. Топ агро-дизели — мощностной потолок сегмента. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Топ Claas — мощностной потолок агросегмента.
Frequently asked questions
What is the Stage 1 effect on the Claas Xerion 5000 479hp (382kW) 2300Nm?
Stage 1 chip tuning on the Claas Xerion 5000 479hp (382kW) 2300Nm boosts engine output by 52 hp: from 520 to 572 hp. Torque rises from 2450 to 2638 Nm (+188 Nm).
What changes in the Claas Xerion ECU after Stage 1?
Stage 1 on the Claas Xerion 5000 479hp (382kW) 2300Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +52 hp with no hardware changes.
What does Stage 1 give on the top-spec Claas Xerion 5000 479hp (382kW) 2300Nm?
On the top-spec Claas Xerion 5000 479hp (382kW) 2300Nm engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How does Stage 2 differ from Stage 1 on the Claas Xerion 5000 479hp (382kW) 2300Nm?
Stage 2 for the Claas Xerion 5000 479hp (382kW) 2300Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Claas Xerion?
Stage 1 on the Claas Xerion voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Claas Xerion 5000 479hp (382kW) 2300Nm done?
The full remap cycle for the Claas Xerion — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Claas Xerion?
The original Claas Xerion ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Claas Xerion 5000 479hp (382kW) 2300Nm?
The cost of Stage 1 for the Claas Xerion 5000 479hp (382kW) 2300Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.