Claas Xerion 3800 344hp (253kW) 1620Nm — Stage 1 file (+51 hp)
hp
Stage 1 file for Claas Xerion 3800 344hp (253kW) 1620Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Claas Xerion 3800 344hp (253kW) 1620Nm ECU
Claas Xerion (I) 3800 344hp (253kW) 1620Nm — agricultural diesel engine of the agricultural segment of the Claas Group group (Германия, 1913). Stage 1 chip tuning raises power from 344 to 395 hp (+51 hp, +15%) and torque from 1620 to 1988 Nm (+368 Nm).
Claas is a German agricultural-machinery maker, founded in 1913. Claas is an independent family-owned company and a leader in combine harvesters. The Claas Lexion is the flagship combine harvester. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Claas — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How many horsepower does the Claas Xerion 3800 344hp (253kW) 1620Nm reach after a remap?
Stage 1 chip tuning on the Claas Xerion 3800 344hp (253kW) 1620Nm boosts engine output by 51 hp: from 344 to 395 hp. Torque rises from 1620 to 1988 Nm (+368 Nm).
What changes in the Claas Xerion ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Claas Xerion with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +51 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Claas Xerion?
Stage 1 on the powerful Claas Xerion 3800 344hp (253kW) 1620Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Claas Xerion 3800 344hp (253kW) 1620Nm?
Stage 2 for the Claas Xerion 3800 344hp (253kW) 1620Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Claas Xerion remain valid after Stage 1?
After remapping the Claas Xerion, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Claas Xerion?
Reading and writing via OBD takes 25-30 minutes on the Claas Xerion. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Claas Xerion?
Before Stage 1 the original of the Claas Xerion 3800 344hp (253kW) 1620Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Claas Xerion 3800 344hp (253kW) 1620Nm cost?
The remap price for the Claas Xerion 3800 344hp (253kW) 1620Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.