Claas Xerion 3300 335hp (246kW) 1450Nm — Stage 1 file (+80 hp)
hp
Stage 1 file for Claas Xerion 3300 335hp (246kW) 1450Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Claas Xerion 3300 335hp (246kW) 1450Nm ECU
Claas Xerion (I) 3300 335hp (246kW) 1450Nm — agricultural diesel engine of the agricultural segment of the Claas Group group (Германия, 1913). Stage 1 chip tuning raises power from 335 to 415 hp (+80 hp, +24%) and torque from 1450 to 1730 Nm (+280 Nm).
The Claas Lexion is the flagship combine harvester. Claas is a German agricultural-machinery maker, founded in 1913. Claas is an independent family-owned company and a leader in combine harvesters. Высокомощные агро-дизели — флагманские тракторы и комбайны. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Claas — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
What is the Stage 1 effect on the Claas Xerion 3300 335hp (246kW) 1450Nm?
After Stage 1 the power of the Claas Xerion 3300 335hp (246kW) 1450Nm rises from 335 to 415 hp, a gain of 80 hp (+24%). Torque rises from 1450 to 1730 Nm (+280 Nm).
How does Stage 1 differ from stock on the Claas Xerion?
Stage 1 on the Claas Xerion 3300 335hp (246kW) 1450Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +80 hp with no hardware changes.
What does Stage 1 give on the powerful Claas Xerion 3300 335hp (246kW) 1450Nm?
The high-output Claas Xerion 3300 335hp (246kW) 1450Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the Claas Xerion 3300 335hp (246kW) 1450Nm?
Stage 2 on the Claas Xerion 3300 335hp (246kW) 1450Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Claas Xerion?
Stage 1 on the Claas Xerion voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Claas Xerion 3300 335hp (246kW) 1450Nm done?
The full remap cycle for the Claas Xerion — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Claas Xerion?
The original Claas Xerion ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Claas Xerion 3300 335hp (246kW) 1450Nm?
The cost of Stage 1 for the Claas Xerion 3300 335hp (246kW) 1450Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.