Claas Arion 640 6.8 R6 155hp (114kW) 657Nm — Stage 1 file (+40 hp)
hp
Stage 1 file for Claas Arion 640 6.8 R6 155hp (114kW) 657Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Claas Arion 640 6.8 R6 155hp (114kW) 657Nm ECU
Claas Arion (I) 640 6.8 R6 155hp (114kW) 657Nm — agricultural diesel engine of the agricultural segment of the Claas Group group (Германия, 1913). Stage 1 chip tuning raises power from 155 to 195 hp (+40 hp, +26%) and torque from 657 to 820 Nm (+163 Nm).
The Claas Lexion is the flagship combine harvester. Claas is a German agricultural-machinery maker, founded in 1913. Claas is an independent family-owned company and a leader in combine harvesters. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Claas среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much horsepower does Stage 1 add for the Claas Arion 640 6.8 R6 155hp (114kW) 657Nm?
Stage 1 chip tuning on the Claas Arion 640 6.8 R6 155hp (114kW) 657Nm boosts engine output by 40 hp: from 155 to 195 hp. Torque rises from 657 to 820 Nm (+163 Nm).
What changes in the Claas Arion ECU after Stage 1?
Stage 1 on the Claas Arion 640 6.8 R6 155hp (114kW) 657Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +40 hp with no hardware changes.
Is a Stage 1 remap safe for the 640 6.8 R6 155hp (114kW) 657Nm?
Stage 1 on the Claas Arion 640 6.8 R6 155hp (114kW) 657Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Claas Arion 640 6.8 R6 155hp (114kW) 657Nm?
Stage 2 for the Claas Arion 640 6.8 R6 155hp (114kW) 657Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Claas Arion?
Stage 1 on the Claas Arion voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Claas Arion 640 6.8 R6 155hp (114kW) 657Nm done?
The full remap cycle for the Claas Arion — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Claas Arion?
The original Claas Arion ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Claas Arion 640 6.8 R6 155hp (114kW) 657Nm?
The cost of Stage 1 for the Claas Arion 640 6.8 R6 155hp (114kW) 657Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.