Citroen SpaceTourer 1.6 BlueHDI 115 hp — Stage 1 file (+25 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Citroen SpaceTourer 1.6 BlueHDI 115 hp ECU

Citroen SpaceTourer (2016) 1.6 BlueHDI 115 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 115 to 140 hp (+25 hp, +22%) and torque from 300 to 340 Nm (+40 Nm). ECU — Bosch EDC17C60. Flashing method: OBD or Bench depending on the unit's protection. The 2016 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.

Citroen has a history of innovation, from hydropneumatic suspension to front-wheel drive. Citroen shares platforms and engines with Peugeot, Opel/Vauxhall and DS within Stellantis. Citroen is part of the Stellantis group (formerly PSA Peugeot Citroen). Mid-range Citroen diesels are a mainstream chip tuning subject.

On older-generation Citroens, Stage 1 is flashed via OBD without a bench. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. The Citroen community in France and Western Europe has a large pool of Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.

Frequently asked questions

How much does the power of the Citroen SpaceTourer 1.6 BlueHDI 115 hp increase after Stage 1?

The Stage 1 gain for the Citroen SpaceTourer 1.6 BlueHDI 115 hp is 25 hp (+22%) over the stock 115 hp, for a total of 140 hp. Torque rises from 300 to 340 Nm (+40 Nm).

What is Stage 1 chip tuning for the Citroen SpaceTourer?

Stage 1 is a software optimization of the factory ECU firmware of the Citroen SpaceTourer with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.

What is the risk of Stage 1 on the Citroen SpaceTourer 1.6 BlueHDI 115 hp?

A remap of the Citroen SpaceTourer 1.6 BlueHDI 115 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.

What is Stage 2 for the Citroen SpaceTourer 1.6 BlueHDI 115 hp?

Stage 2 on the Citroen SpaceTourer 1.6 BlueHDI 115 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

What ECU platform does the Citroen SpaceTourer 1.6 BlueHDI 115 hp use?

The Citroen SpaceTourer 1.6 BlueHDI 115 hp is fitted with the Bosch EDC17C60 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.

Does the factory warranty of the Citroen SpaceTourer remain valid after Stage 1?

After remapping the Citroen SpaceTourer, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.

How long is the wait for a Stage 1 remap for the Citroen SpaceTourer?

Reading and writing via OBD takes 25-30 minutes on the Citroen SpaceTourer. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.

How do you roll back to the factory firmware of the Citroen SpaceTourer?

Before Stage 1 the original of the Citroen SpaceTourer 1.6 BlueHDI 115 hp is read out and saved — returning to the factory state is possible at any time.

How much does chip tuning the Citroen SpaceTourer 1.6 BlueHDI 115 hp cost?

The remap price for the Citroen SpaceTourer 1.6 BlueHDI 115 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.

Last updated: 31.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno