Citroen Picasso 1.6 HDI 92 hp — Stage 1 file (+23 hp)
hp
Stage 1 file for Citroen Picasso 1.6 HDI 92 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen Picasso 1.6 HDI 92 hp ECU
Citroen Picasso (2013) 1.6 HDI 92 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 92 to 115 hp (+23 hp, +25%) and torque from 230 to 270 Nm (+40 Nm). ECU — Bosch EDC17C10. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. The 2013 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Citroen is part of the Stellantis group (formerly PSA Peugeot Citroen). The Citroen range covers compacts, saloons, SUVs, MPVs and commercial vehicles. Citroen is a French carmaker, founded in 1919 by Andre Citroen. The factory calibration on Citroen diesels is conservative, leaving headroom for Stage 1.
On older-generation Citroens, Stage 1 is flashed via OBD without a bench. The Citroen community in France and Western Europe has a large pool of Stage files. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. Low-output Citroen engines are city units, and Stage 1 is safe. On naturally aspirated Citroen engines, the main effect is on throttle response.
Frequently asked questions
What power gain do you get after chip tuning the Citroen Picasso 1.6 HDI 92 hp?
The Stage 1 gain for the Citroen Picasso 1.6 HDI 92 hp is 23 hp (+25%) over the stock 92 hp, for a total of 115 hp. Torque rises from 230 to 270 Nm (+40 Nm).
What is Stage 1 chip tuning for the Citroen Picasso?
Stage 1 is a software optimization of the factory ECU firmware of the Citroen Picasso with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +23 hp with no hardware changes.
Is Stage 1 worth doing on the base Citroen Picasso?
Stage 1 on the base Citroen Picasso is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Citroen Picasso 1.6 HDI 92 hp?
Stage 2 on the Citroen Picasso 1.6 HDI 92 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Citroen Picasso 1.6 HDI 92 hp use?
The Citroen Picasso 1.6 HDI 92 hp is fitted with the Bosch EDC17C10 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Citroen Picasso remain valid after Stage 1?
After remapping the Citroen Picasso, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Citroen Picasso?
Reading and writing via OBD takes 25-30 minutes on the Citroen Picasso. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Citroen Picasso?
Before Stage 1 the original of the Citroen Picasso 1.6 HDI 92 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Citroen Picasso 1.6 HDI 92 hp cost?
The remap price for the Citroen Picasso 1.6 HDI 92 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.