Citroen Picasso 1.6 BlueHDI 100 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Citroen Picasso 1.6 BlueHDI 100 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen Picasso 1.6 BlueHDI 100 hp ECU
Citroen Picasso (2013) 1.6 BlueHDI 100 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 100 to 135 hp (+35 hp, +35%) and torque from 254 to 300 Nm (+46 Nm). ECU — Bosch EDC17C60. Flashing method: OBD or Bench depending on the unit's protection. The 2013 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Citroen is part of the Stellantis group (formerly PSA Peugeot Citroen). The Citroen range covers compacts, saloons, SUVs, MPVs and commercial vehicles. Citroen is a French carmaker, founded in 1919 by Andre Citroen. Citroen is a mainstream chip tuning subject among Western European taxi fleets.
On older-generation Citroens, Stage 1 is flashed via OBD without a bench. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. The Citroen community in France and Western Europe has a large pool of Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
What power gain do you get after chip tuning the Citroen Picasso 1.6 BlueHDI 100 hp?
The Stage 1 gain for the Citroen Picasso 1.6 BlueHDI 100 hp is 35 hp (+35%) over the stock 100 hp, for a total of 135 hp. Torque rises from 254 to 300 Nm (+46 Nm).
What is Stage 1 chip tuning for the Citroen Picasso?
Stage 1 on the Citroen Picasso 1.6 BlueHDI 100 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +35 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.6 BlueHDI 100 hp?
Stage 1 on the Citroen Picasso 1.6 BlueHDI 100 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Citroen Picasso 1.6 BlueHDI 100 hp?
Stage 2 on the Citroen Picasso 1.6 BlueHDI 100 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Citroen Picasso 1.6 BlueHDI 100 hp run?
The control unit of the Citroen Picasso 1.6 BlueHDI 100 hp is the Bosch EDC17C60. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Citroen Picasso?
Stage 1 on the Citroen Picasso voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Citroen Picasso 1.6 BlueHDI 100 hp done?
The full remap cycle for the Citroen Picasso — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Citroen Picasso?
The original Citroen Picasso ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Citroen Picasso 1.6 BlueHDI 100 hp?
The cost of Stage 1 for the Citroen Picasso 1.6 BlueHDI 100 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.