Citroen Jumpy 2.0 BlueHDI 180 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Citroen Jumpy 2.0 BlueHDI 180 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen Jumpy 2.0 BlueHDI 180 hp ECU
Citroen Jumpy (2016 - III) 2.0 BlueHDI 180 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 180 to 200 hp (+20 hp, +11%) and torque from 400 to 450 Nm (+50 Nm). This engine ships with different ECU variants: Delphi DCM6.2A, Delphi DCM7.1A. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A diesel built in 2016 — the Tricore ECU era; OBD flash works on most production revisions.
Citroen is part of the Stellantis group (formerly PSA Peugeot Citroen). The Citroen range covers compacts, saloons, SUVs, MPVs and commercial vehicles. Citroen is a French carmaker, founded in 1919 by Andre Citroen. Citroen is a mainstream chip tuning subject among Western European taxi fleets.
Stage 1 on Citroen diesels delivers a noticeable torque gain. On older-generation Citroens, Stage 1 is flashed via OBD without a bench. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
What power gain do you get after chip tuning the Citroen Jumpy 2.0 BlueHDI 180 hp?
Stage 1 for the Citroen Jumpy 2.0 BlueHDI 180 hp adds +20 hp — power increases from 180 to 200 hp (+11%). Torque rises from 400 to 450 Nm (+50 Nm).
What does a Stage 1 remap of the Citroen Jumpy 2.0 BlueHDI 180 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Citroen Jumpy with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
What is the risk of Stage 1 on the Citroen Jumpy 2.0 BlueHDI 180 hp?
A remap of the Citroen Jumpy 2.0 BlueHDI 180 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Citroen Jumpy 2.0 BlueHDI 180 hp?
Stage 2 for the Citroen Jumpy 2.0 BlueHDI 180 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Citroen Jumpy 2.0 BlueHDI 180 hp built with?
The Citroen Jumpy 2.0 BlueHDI 180 hp comes with 2 ECU variants: Delphi DCM6.2A, Delphi DCM7.1A. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Citroen Jumpy remain valid after Stage 1?
After remapping the Citroen Jumpy, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Citroen Jumpy?
Reading and writing via OBD takes 25-30 minutes on the Citroen Jumpy. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Citroen Jumpy?
Before Stage 1 the original of the Citroen Jumpy 2.0 BlueHDI 180 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Citroen Jumpy 2.0 BlueHDI 180 hp cost?
The remap price for the Citroen Jumpy 2.0 BlueHDI 180 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.