Citroen Jumpy 1.6 BlueHDI S&S 95 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Citroen Jumpy 1.6 BlueHDI S&S 95 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen Jumpy 1.6 BlueHDI S&S 95 hp ECU
Citroen Jumpy (2016 - III) 1.6 BlueHDI S&S 95 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 95 to 130 hp (+35 hp, +37%) and torque from 240 to 300 Nm (+60 Nm). ECU — Bosch EDC17C60. Flashing method: OBD or Bench depending on the unit's protection. The 2016 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Citroen shares platforms and engines with Peugeot, Opel/Vauxhall and DS within Stellantis. Citroen is part of the Stellantis group (formerly PSA Peugeot Citroen). The Citroen range covers compacts, saloons, SUVs, MPVs and commercial vehicles. HDi and BlueHDi are Citroen's badges for direct-injection turbo diesels.
The Citroen community in France and Western Europe has a large pool of Stage files. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. On older-generation Citroens, Stage 1 is flashed via OBD without a bench. Low-output Citroen engines are city units, and Stage 1 is safe. On naturally aspirated Citroen engines, the main effect is on throttle response.
Frequently asked questions
What is the Stage 1 effect on the Citroen Jumpy 1.6 BlueHDI S&S 95 hp?
The Stage 1 gain for the Citroen Jumpy 1.6 BlueHDI S&S 95 hp is 35 hp (+37%) over the stock 95 hp, for a total of 130 hp. Torque rises from 240 to 300 Nm (+60 Nm).
What is Stage 1 chip tuning for the Citroen Jumpy?
Stage 1 chip tuning of the Citroen Jumpy is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +35 hp with no hardware changes.
What does chip tuning give on the low-output Citroen Jumpy 1.6 BlueHDI S&S 95 hp?
Stage 1 on the base Citroen Jumpy is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How much does Stage 2 add on the Citroen Jumpy?
Stage 2 on the Citroen Jumpy 1.6 BlueHDI S&S 95 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECU is fitted to the Citroen Jumpy 1.6 BlueHDI S&S 95 hp?
The Citroen Jumpy 1.6 BlueHDI S&S 95 hp ECU is the Bosch EDC17C60. Production versions support OBD access; locked variants require Bench (BDM/JTAG).
What happens to the Citroen Jumpy warranty after chip tuning?
The factory warranty of the Citroen Jumpy does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Citroen Jumpy take?
On the Citroen Jumpy 1.6 BlueHDI S&S 95 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Citroen Jumpy?
Yes, the original ECU firmware of the Citroen Jumpy 1.6 BlueHDI S&S 95 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Citroen Jumpy?
Stage 1 for the Citroen Jumpy 1.6 BlueHDI S&S 95 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.