Citroen Jumpy 1.5 BlueHDI 120 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Citroen Jumpy 1.5 BlueHDI 120 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen Jumpy 1.5 BlueHDI 120 hp ECU
Citroen Jumpy (2016 - III) 1.5 BlueHDI 120 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 120 to 150 hp (+30 hp, +25%) and torque from 300 to 340 Nm (+40 Nm). ECU — Bosch MD1CS003. Flashing method: OBD or Bench depending on the unit's protection. The 2016 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Citroen is a French carmaker, founded in 1919 by Andre Citroen. Citroen has a history of innovation, from hydropneumatic suspension to front-wheel drive. Citroen shares platforms and engines with Peugeot, Opel/Vauxhall and DS within Stellantis. DPF/SCR with AdBlue (BlueHDi) is standard on Euro-6 Citroen diesels.
The Citroen community in France and Western Europe has a large pool of Stage files. Stage 1 on Citroen diesels delivers a noticeable torque gain. On older-generation Citroens, Stage 1 is flashed via OBD without a bench. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How much horsepower does Stage 1 add for the Citroen Jumpy 1.5 BlueHDI 120 hp?
After Stage 1 the power of the Citroen Jumpy 1.5 BlueHDI 120 hp rises from 120 to 150 hp, a gain of 30 hp (+25%). Torque rises from 300 to 340 Nm (+40 Nm).
How does Stage 1 differ from stock on the Citroen Jumpy?
Stage 1 is a software optimization of the factory ECU firmware of the Citroen Jumpy with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Citroen Jumpy 1.5 BlueHDI 120 hp?
A remap of the Citroen Jumpy 1.5 BlueHDI 120 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Citroen Jumpy 1.5 BlueHDI 120 hp?
Stage 2 on the Citroen Jumpy 1.5 BlueHDI 120 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Citroen Jumpy 1.5 BlueHDI 120 hp use?
The Citroen Jumpy 1.5 BlueHDI 120 hp is fitted with the Bosch MD1CS003 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Citroen Jumpy remain valid after Stage 1?
After remapping the Citroen Jumpy, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Citroen Jumpy?
Reading and writing via OBD takes 25-30 minutes on the Citroen Jumpy. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Citroen Jumpy?
Before Stage 1 the original of the Citroen Jumpy 1.5 BlueHDI 120 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Citroen Jumpy 1.5 BlueHDI 120 hp cost?
The remap price for the Citroen Jumpy 1.5 BlueHDI 120 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.