Citroen Jumpy 2.0 HDI (2006) 128 hp — Stage 1 file (+52 hp)
hp
Stage 1 file for Citroen Jumpy 2.0 HDI (2006) 128 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen Jumpy 2.0 HDI (2006) 128 hp ECU
Citroen Jumpy (2012 - II - Phase II) 2.0 HDI (2006) 128 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 128 to 180 hp (+52 hp, +41%) and torque from 300 to 400 Nm (+100 Nm). This engine ships with different ECU variants: Delphi DCM3.5, Siemens/Continental SID803. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A diesel built in 2012 — the Tricore ECU era; OBD flash works on most production revisions.
Citroen has a history of innovation, from hydropneumatic suspension to front-wheel drive. Citroen shares platforms and engines with Peugeot, Opel/Vauxhall and DS within Stellantis. Citroen is part of the Stellantis group (formerly PSA Peugeot Citroen). The Citroen diesel range is fully shared with Peugeot, Opel and DS within Stellantis.
ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. The Citroen community in France and Western Europe has a large pool of Stage files. Stage 1 on Citroen diesels delivers a noticeable torque gain. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
How much does the power of the Citroen Jumpy 2.0 HDI (2006) 128 hp increase after Stage 1?
Stage 1 chip tuning on the Citroen Jumpy 2.0 HDI (2006) 128 hp boosts engine output by 52 hp: from 128 to 180 hp. Torque rises from 300 to 400 Nm (+100 Nm).
What changes in the Citroen Jumpy ECU after Stage 1?
Stage 1 on the Citroen Jumpy 2.0 HDI (2006) 128 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +52 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0 HDI (2006) 128 hp?
Stage 1 on the Citroen Jumpy 2.0 HDI (2006) 128 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Citroen Jumpy 2.0 HDI (2006) 128 hp?
Stage 2 for the Citroen Jumpy 2.0 HDI (2006) 128 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the Citroen Jumpy 2.0 HDI (2006) 128 hp have?
The Citroen Jumpy 2.0 HDI (2006) 128 hp has 2 ECU variants: Delphi DCM3.5, Siemens/Continental SID803. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Citroen Jumpy?
Stage 1 on the Citroen Jumpy voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Citroen Jumpy 2.0 HDI (2006) 128 hp done?
The full remap cycle for the Citroen Jumpy — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Citroen Jumpy?
The original Citroen Jumpy ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Citroen Jumpy 2.0 HDI (2006) 128 hp?
The cost of Stage 1 for the Citroen Jumpy 2.0 HDI (2006) 128 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.