Citroen Jumpy 2.0 HDI 90 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Citroen Jumpy 2.0 HDI 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen Jumpy 2.0 HDI 90 hp ECU
Citroen Jumpy (2007 - II - Phase I) 2.0 HDI 90 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 90 to 115 hp (+25 hp, +28%) and torque from 205 to 250 Nm (+45 Nm). This engine ships with different ECU variants: Bosch EDC15C2, Bosch EDC15C7, Siemens/Continental SID801. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. The 2007 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
The Citroen range covers compacts, saloons, SUVs, MPVs and commercial vehicles. Citroen is a French carmaker, founded in 1919 by Andre Citroen. Citroen has a history of innovation, from hydropneumatic suspension to front-wheel drive. Citroen is a mainstream chip tuning subject among Western European taxi fleets.
The Citroen community in France and Western Europe has a large pool of Stage files. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. Low-output Citroen engines are city units, and Stage 1 is safe. On naturally aspirated Citroen engines, the main effect is on throttle response.
Frequently asked questions
How many horsepower does the Citroen Jumpy 2.0 HDI 90 hp reach after a remap?
The Stage 1 gain for the Citroen Jumpy 2.0 HDI 90 hp is 25 hp (+28%) over the stock 90 hp, for a total of 115 hp. Torque rises from 205 to 250 Nm (+45 Nm).
What is Stage 1 chip tuning for the Citroen Jumpy?
Stage 1 chip tuning of the Citroen Jumpy is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +25 hp with no hardware changes.
What does chip tuning give on the low-output Citroen Jumpy 2.0 HDI 90 hp?
Stage 1 on the base Citroen Jumpy is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How much does Stage 2 add on the Citroen Jumpy?
Stage 2 on the Citroen Jumpy 2.0 HDI 90 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Citroen Jumpy 2.0 HDI 90 hp?
The Citroen Jumpy 2.0 HDI 90 hp was fitted with different ECUs depending on the year and trim: Bosch EDC15C2, Bosch EDC15C7, Siemens/Continental SID801. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Citroen Jumpy warranty after chip tuning?
The factory warranty of the Citroen Jumpy does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Citroen Jumpy take?
On the Citroen Jumpy 2.0 HDI 90 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Citroen Jumpy?
Yes, the original ECU firmware of the Citroen Jumpy 2.0 HDI 90 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Citroen Jumpy?
Stage 1 for the Citroen Jumpy 2.0 HDI 90 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.