Citroen Jumpy 2.0 HDI 140 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Citroen Jumpy 2.0 HDI 140 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen Jumpy 2.0 HDI 140 hp ECU
Citroen Jumpy (2007 - II - Phase I) 2.0 HDI 140 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 140 to 170 hp (+30 hp, +21%) and torque from 320 to 400 Nm (+80 Nm). ECU — Delphi DCM3.4(+). Flashing method: OBD or Bench depending on the unit's protection. The 2007 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Citroen shares platforms and engines with Peugeot, Opel/Vauxhall and DS within Stellantis. Citroen is part of the Stellantis group (formerly PSA Peugeot Citroen). The Citroen range covers compacts, saloons, SUVs, MPVs and commercial vehicles. On older Citroen HDi engines, Stage 1 goes in over OBD with no complications.
Stage 1 on Citroen diesels delivers a noticeable torque gain. The Citroen community in France and Western Europe has a large pool of Stage files. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
What is the Stage 1 effect on the Citroen Jumpy 2.0 HDI 140 hp?
After Stage 1 the power of the Citroen Jumpy 2.0 HDI 140 hp rises from 140 to 170 hp, a gain of 30 hp (+21%). Torque rises from 320 to 400 Nm (+80 Nm).
How does Stage 1 differ from stock on the Citroen Jumpy?
Stage 1 is a software optimization of the factory ECU firmware of the Citroen Jumpy with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Citroen Jumpy 2.0 HDI 140 hp?
A remap of the Citroen Jumpy 2.0 HDI 140 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Citroen Jumpy 2.0 HDI 140 hp?
Stage 2 on the Citroen Jumpy 2.0 HDI 140 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Citroen Jumpy 2.0 HDI 140 hp use?
The Citroen Jumpy 2.0 HDI 140 hp is fitted with the Delphi DCM3.4(+) ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Citroen Jumpy remain valid after Stage 1?
After remapping the Citroen Jumpy, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Citroen Jumpy?
Reading and writing via OBD takes 25-30 minutes on the Citroen Jumpy. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Citroen Jumpy?
Before Stage 1 the original of the Citroen Jumpy 2.0 HDI 140 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Citroen Jumpy 2.0 HDI 140 hp cost?
The remap price for the Citroen Jumpy 2.0 HDI 140 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.