Citroen Jumpy 2.0 HDI 128 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Citroen Jumpy 2.0 HDI 128 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen Jumpy 2.0 HDI 128 hp ECU
Citroen Jumpy (2007 - II - Phase I) 2.0 HDI 128 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 128 to 163 hp (+35 hp, +27%) and torque from 300 to 400 Nm (+100 Nm). This engine ships with different ECU variants: Delphi DCM3.5, Siemens/Continental SID803. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2007 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Citroen shares platforms and engines with Peugeot, Opel/Vauxhall and DS within Stellantis. Citroen is part of the Stellantis group (formerly PSA Peugeot Citroen). The Citroen range covers compacts, saloons, SUVs, MPVs and commercial vehicles. HDi and BlueHDi are Citroen's badges for direct-injection turbo diesels.
Stage 1 on Citroen diesels delivers a noticeable torque gain. The Citroen community in France and Western Europe has a large pool of Stage files. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
What is the Stage 1 effect on the Citroen Jumpy 2.0 HDI 128 hp?
The Stage 1 gain for the Citroen Jumpy 2.0 HDI 128 hp is 35 hp (+27%) over the stock 128 hp, for a total of 163 hp. Torque rises from 300 to 400 Nm (+100 Nm).
What is Stage 1 chip tuning for the Citroen Jumpy?
Stage 1 is a software optimization of the factory ECU firmware of the Citroen Jumpy with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
What is the risk of Stage 1 on the Citroen Jumpy 2.0 HDI 128 hp?
A remap of the Citroen Jumpy 2.0 HDI 128 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Citroen Jumpy 2.0 HDI 128 hp?
Stage 2 on the Citroen Jumpy 2.0 HDI 128 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Citroen Jumpy 2.0 HDI 128 hp built with?
The Citroen Jumpy 2.0 HDI 128 hp comes with 2 ECU variants: Delphi DCM3.5, Siemens/Continental SID803. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Citroen Jumpy remain valid after Stage 1?
After remapping the Citroen Jumpy, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Citroen Jumpy?
Reading and writing via OBD takes 25-30 minutes on the Citroen Jumpy. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Citroen Jumpy?
Before Stage 1 the original of the Citroen Jumpy 2.0 HDI 128 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Citroen Jumpy 2.0 HDI 128 hp cost?
The remap price for the Citroen Jumpy 2.0 HDI 128 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.