Citroen Jumpy 2.0 HDI 110 hp — Stage 1 file (+26 hp)
hp
Stage 1 file for Citroen Jumpy 2.0 HDI 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen Jumpy 2.0 HDI 110 hp ECU
Citroen Jumpy (2007 - II - Phase I) 2.0 HDI 110 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 110 to 136 hp (+26 hp, +24%) and torque from 250 to 290 Nm (+40 Nm). This engine ships with different ECU variants: Bosch EDC15C2, Bosch EDC15C7. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. Diesel engines built in 2007 — the era of classic Common Rail without strong encryption.
Citroen is a French carmaker, founded in 1919 by Andre Citroen. Citroen has a history of innovation, from hydropneumatic suspension to front-wheel drive. Citroen shares platforms and engines with Peugeot, Opel/Vauxhall and DS within Stellantis. The Citroen diesel range is fully shared with Peugeot, Opel and DS within Stellantis.
Stage 1 on Citroen diesels delivers a noticeable torque gain. The Citroen community in France and Western Europe has a large pool of Stage files. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
How much horsepower does Stage 1 add for the Citroen Jumpy 2.0 HDI 110 hp?
Stage 1 chip tuning on the Citroen Jumpy 2.0 HDI 110 hp boosts engine output by 26 hp: from 110 to 136 hp. Torque rises from 250 to 290 Nm (+40 Nm).
What changes in the Citroen Jumpy ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Citroen Jumpy with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +26 hp with no hardware changes.
What is the risk of Stage 1 on the Citroen Jumpy 2.0 HDI 110 hp?
A remap of the Citroen Jumpy 2.0 HDI 110 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Citroen Jumpy 2.0 HDI 110 hp?
Stage 2 for the Citroen Jumpy 2.0 HDI 110 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Citroen Jumpy 2.0 HDI 110 hp built with?
The Citroen Jumpy 2.0 HDI 110 hp comes with 2 ECU variants: Bosch EDC15C2, Bosch EDC15C7. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Citroen Jumpy remain valid after Stage 1?
After remapping the Citroen Jumpy, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Citroen Jumpy?
Reading and writing via OBD takes 25-30 minutes on the Citroen Jumpy. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Citroen Jumpy?
Before Stage 1 the original of the Citroen Jumpy 2.0 HDI 110 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Citroen Jumpy 2.0 HDI 110 hp cost?
The remap price for the Citroen Jumpy 2.0 HDI 110 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.