Citroen DS5 2.0 HDI 163 hp — Stage 1 file (+27 hp)
hp
Stage 1 file for Citroen DS5 2.0 HDI 163 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen DS5 2.0 HDI 163 hp ECU
Citroen DS5 (2012) 2.0 HDI 163 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 163 to 190 hp (+27 hp, +17%) and torque from 340 to 400 Nm (+60 Nm). This engine ships with different ECU variants: Delphi DCM3.4(+), Delphi DCM3.5, Delphi DCM6.2C. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. A diesel built in 2012 — the Tricore ECU era; OBD flash works on most production revisions.
The Citroen range covers compacts, saloons, SUVs, MPVs and commercial vehicles. Citroen is a French carmaker, founded in 1919 by Andre Citroen. Citroen has a history of innovation, from hydropneumatic suspension to front-wheel drive. The factory calibration on Citroen diesels is conservative, leaving headroom for Stage 1.
Stage 1 on Citroen diesels delivers a noticeable torque gain. On older-generation Citroens, Stage 1 is flashed via OBD without a bench. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
How many horsepower does the Citroen DS5 2.0 HDI 163 hp reach after a remap?
Stage 1 for the Citroen DS5 2.0 HDI 163 hp adds +27 hp — power increases from 163 to 190 hp (+17%). Torque rises from 340 to 400 Nm (+60 Nm).
What does a Stage 1 remap of the Citroen DS5 2.0 HDI 163 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Citroen DS5 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +27 hp with no hardware changes.
What is the risk of Stage 1 on the Citroen DS5 2.0 HDI 163 hp?
A remap of the Citroen DS5 2.0 HDI 163 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Citroen DS5 2.0 HDI 163 hp?
Stage 2 for the Citroen DS5 2.0 HDI 163 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Citroen DS5 2.0 HDI 163 hp built with?
The Citroen DS5 2.0 HDI 163 hp comes with 3 ECU variants: Delphi DCM3.4(+), Delphi DCM3.5, Delphi DCM6.2C. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Citroen DS5 remain valid after Stage 1?
After remapping the Citroen DS5, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Citroen DS5?
Reading and writing via OBD takes 25-30 minutes on the Citroen DS5. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Citroen DS5?
Before Stage 1 the original of the Citroen DS5 2.0 HDI 163 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Citroen DS5 2.0 HDI 163 hp cost?
The remap price for the Citroen DS5 2.0 HDI 163 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.