Citroen DS4 1.2 THP Puretech GPF 130 hp — Stage 1 file (+15 hp)
hp
Stage 1 file for Citroen DS4 1.2 THP Puretech GPF 130 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen DS4 1.2 THP Puretech GPF 130 hp ECU
Citroen DS4 (2016) 1.2 THP Puretech GPF 130 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 130 to 145 hp (+15 hp, +12%) and torque from 230 to 275 Nm (+45 Nm). ECU — Siemens/Continental VD56.1. Flashing method: OBD or Bench depending on the unit's protection. A petrol engine built in 2016 — a Tricore platform without strong protection; OBD access works.
Citroen has a history of innovation, from hydropneumatic suspension to front-wheel drive. Citroen shares platforms and engines with Peugeot, Opel/Vauxhall and DS within Stellantis. Citroen is part of the Stellantis group (formerly PSA Peugeot Citroen). PureTech is Citroen's badge for its turbo petrol engines. The Citroen petrol range is shared with Peugeot and Opel within Stellantis. Citroen turbo petrol engines deliver a noticeable gain with Stage 1.
Stage 1 on Citroen petrol engines gives a noticeable gain. On older-generation Citroens, Stage 1 is flashed via OBD without a bench. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
How much does the power of the Citroen DS4 1.2 THP Puretech GPF 130 hp increase after Stage 1?
Stage 1 for the Citroen DS4 1.2 THP Puretech GPF 130 hp adds +15 hp — power increases from 130 to 145 hp (+12%). Torque rises from 230 to 275 Nm (+45 Nm).
What does a Stage 1 remap of the Citroen DS4 1.2 THP Puretech GPF 130 hp include?
Stage 1 on the Citroen DS4 1.2 THP Puretech GPF 130 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +15 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.2 THP Puretech GPF 130 hp?
Stage 1 on the Citroen DS4 1.2 THP Puretech GPF 130 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Citroen DS4 1.2 THP Puretech GPF 130 hp?
Stage 2 for the Citroen DS4 1.2 THP Puretech GPF 130 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Citroen DS4 1.2 THP Puretech GPF 130 hp run?
The control unit of the Citroen DS4 1.2 THP Puretech GPF 130 hp is the Siemens/Continental VD56.1. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Citroen DS4?
Stage 1 on the Citroen DS4 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Citroen DS4 1.2 THP Puretech GPF 130 hp done?
The full remap cycle for the Citroen DS4 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Citroen DS4?
The original Citroen DS4 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Citroen DS4 1.2 THP Puretech GPF 130 hp?
The cost of Stage 1 for the Citroen DS4 1.2 THP Puretech GPF 130 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.